On the effect of interrupted ageing (T6I4) on the mechanical properties of AA6351 and AA7050 alloys. (2021)
- Authors:
- USP affiliated authors: BAPTISTA, CARLOS ANTONIO REIS PEREIRA - EEL ; BARBOZA, MIGUEL JUSTINO RIBEIRO - EEL ; ANTUNES, ANA MARCIA BARBOSA DA SILVA - EEL ; CARVALHO, ANDRE LUIS MOREIRA DE - EESC
- Unidades: EEL; EESC
- DOI: 10.1590/0370-44672019740154
- Subjects: LIGAS METÁLICAS; MECÂNICA DA FRATURA
- Agências de fomento:
- Language: Inglês
- Abstract: The mechanical properties of age-hardenable aluminum alloys are strongly influ enced by the volume fraction, size and spacing of hardening precipitates. In addition, researches have shown that interrupted ageing (T6I4) could benefit the hardening re sponse of these alloys. Interrupted ageing is a term generally used for the microstruc tural development process of an alloy aged at a reduced temperature after partially aged at a higher temperature. Thus, this process produces a change in the mechanical properties of the alloy. In this study, the precipitate structures and mechanical proper ties of AA6351 and AA7050 alloys were investigated. Transmission electron micros copy analyses of the hardening precipitates were carried out. Hardness and tensile properties were performed to compare the effect of disrupted ageing on AA6351-T6 / AA6351-T6I4 and AA7050-T7451 / AA7050-T6I4 alloys. AA6351-T6I4 showed a higher volumetric fraction of hardening precipitates with heterogeneous size and resis tance lower than AA6351-T6. In addition, AA7050-T6I4 showed a higher volumetric fraction of hardening precipitates with smaller size and similar resistance to AA7050- T7451. However, in both cases, interrupted ageing contributed to increase ductility and toughness.
- Imprenta:
- Publisher place: Ouro Preto
- Date published: 2021
- Source:
- Título do periódico: REM - International Engineering Journal
- ISSN: 0370-4467
- Volume/Número/Paginação/Ano: v. 74, n.1, p. 67-73
- Este periódico é de acesso aberto
- Este artigo é de acesso aberto
- URL de acesso aberto
- Cor do Acesso Aberto: gold
- Licença: cc-by
-
ABNT
ANTUNES, Ana Márcia Barbosa da Silva et al. On the effect of interrupted ageing (T6I4) on the mechanical properties of AA6351 and AA7050 alloys. REM - International Engineering Journal, v. 74, n. 1, p. 67-73, 2021Tradução . . Disponível em: https://doi.org/10.1590/0370-44672019740154. Acesso em: 06 maio 2024. -
APA
Antunes, A. M. B. da S., Baptista, C. A. R. P., Barboza, M. J. R., & Carvalho, A. L. M. de. (2021). On the effect of interrupted ageing (T6I4) on the mechanical properties of AA6351 and AA7050 alloys. REM - International Engineering Journal, 74( 1), 67-73. doi:10.1590/0370-44672019740154 -
NLM
Antunes AMB da S, Baptista CARP, Barboza MJR, Carvalho ALM de. On the effect of interrupted ageing (T6I4) on the mechanical properties of AA6351 and AA7050 alloys. [Internet]. REM - International Engineering Journal. 2021 ; 74( 1): 67-73.[citado 2024 maio 06 ] Available from: https://doi.org/10.1590/0370-44672019740154 -
Vancouver
Antunes AMB da S, Baptista CARP, Barboza MJR, Carvalho ALM de. On the effect of interrupted ageing (T6I4) on the mechanical properties of AA6351 and AA7050 alloys. [Internet]. REM - International Engineering Journal. 2021 ; 74( 1): 67-73.[citado 2024 maio 06 ] Available from: https://doi.org/10.1590/0370-44672019740154 - Effect of the interrupted aging heat treatment T6I4 on the tensile properties and fatigue resistance of AA7050 alloy
- Study of the influence of the RRA thermal treatment and plasma nitriding on corrosion behavior of 7075-T6 aluminum alloy
- Estudo do comportamento em fadiga de alto ciclo das ligas de alumínio AA6351 e AA7050 para aplicação aeronáutica
- Effect of shot peening on fatigue behavior of AISI 4340 in different loading conditions
- Mechanical behavior of surface nitrided and heat-treated laser welded Ti-6Al-4V
- Investigation of residual stress, stress relaxation and work hardening effects induced by shot peening on the fatigue life of AA 6005-T6 aluminum alloy
- Fracture Resistance of Flash Welded and Laser Welded Butt Joints in a Microalloyed HSLA Steel
- Fatigue crack growth behavior of laser-shock processed aluminum alloy 2024-T3
- Influence of Niobium or Molybdenum Addition on Microstructure and Tensile Properties of Nickel-Chromium Alloys
- Improving corrosion resistance of Ti–6Al–4V alloy through plasma-assisted PVD deposited nitride coatings
Informações sobre o DOI: 10.1590/0370-44672019740154 (Fonte: oaDOI API)
Download do texto completo
| Tipo | Nome | Link | |
|---|---|---|---|
 | transferir (32).pdf | Direct link |
How to cite
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
