ReP USP - Resultado da busca

Artigo de periodico
Evaluation of grinding process using simultaneously MQL technique and cleaning jet on grinding wheel surface (2019)
Rodriguez, Rafael Lemes; Lopes, José Claudio; Hildebrandt, Rodolfo Alexandre; Perez, Ricardo Rozo Vaz; Diniz, Anselmo Eduardo; Sanchez, Luiz Eduardo de Angelo; Rodrigues, Alessandro Roger ; Mello, Hamilton José de; Aguiar, Paulo Roberto de; Bianchi, Eduardo Carlos
Source: Journal of Materials Processing Technology. Unidade: EESC
Subjects: REFRIGERAÇÃO, USINAGEM, MOAGEM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RODRIGUEZ, Rafael Lemes et al. Evaluation of grinding process using simultaneously MQL technique and cleaning jet on grinding wheel surface. Journal of Materials Processing Technology, v. 271, p. Se 2019, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.jmatprotec.2019.03.019. Acesso em: 10 jun. 2024.
APA
Rodriguez, R. L., Lopes, J. C., Hildebrandt, R. A., Perez, R. R. V., Diniz, A. E., Sanchez, L. E. de A., et al. (2019). Evaluation of grinding process using simultaneously MQL technique and cleaning jet on grinding wheel surface. Journal of Materials Processing Technology, 271, Se 2019. doi:10.1016/j.jmatprotec.2019.03.019
NLM
Rodriguez RL, Lopes JC, Hildebrandt RA, Perez RRV, Diniz AE, Sanchez LE de A, Rodrigues AR, Mello HJ de, Aguiar PR de, Bianchi EC. Evaluation of grinding process using simultaneously MQL technique and cleaning jet on grinding wheel surface [Internet]. Journal of Materials Processing Technology. 2019 ; 271 Se 2019.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2019.03.019
Vancouver
Rodriguez RL, Lopes JC, Hildebrandt RA, Perez RRV, Diniz AE, Sanchez LE de A, Rodrigues AR, Mello HJ de, Aguiar PR de, Bianchi EC. Evaluation of grinding process using simultaneously MQL technique and cleaning jet on grinding wheel surface [Internet]. Journal of Materials Processing Technology. 2019 ; 271 Se 2019.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2019.03.019
Artigo de periodico
Resistance upset welding of Zr-based bulk metallic glasses (2018)
Andreoli, Angelo Fernandes; Ponsoni, Jéssica Bruna; Soares, Carolina ; Oliveira, Marcelo Falcão de ; Kiminami, Claudio Shyinti
Source: Journal of Materials Processing Technology. Unidade: EESC
Subjects: SOLDAGEM, VIDROS METÁLICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ANDREOLI, Angelo Fernandes et al. Resistance upset welding of Zr-based bulk metallic glasses. Journal of Materials Processing Technology, v. 255, p. 760-764, 2018Tradução . . Disponível em: https://doi.org/10.1016/j.jmatprotec.2018.01.034. Acesso em: 10 jun. 2024.
APA
Andreoli, A. F., Ponsoni, J. B., Soares, C., Oliveira, M. F. de, & Kiminami, C. S. (2018). Resistance upset welding of Zr-based bulk metallic glasses. Journal of Materials Processing Technology, 255, 760-764. doi:10.1016/j.jmatprotec.2018.01.034
NLM
Andreoli AF, Ponsoni JB, Soares C, Oliveira MF de, Kiminami CS. Resistance upset welding of Zr-based bulk metallic glasses [Internet]. Journal of Materials Processing Technology. 2018 ; 255 760-764.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2018.01.034
Vancouver
Andreoli AF, Ponsoni JB, Soares C, Oliveira MF de, Kiminami CS. Resistance upset welding of Zr-based bulk metallic glasses [Internet]. Journal of Materials Processing Technology. 2018 ; 255 760-764.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2018.01.034
Artigo de periodico
Ni-based Mar-M247 superalloy as a friction stir processing tool (2018)
Costa, Alex Matos da Silva; Oliveira, J; Pereira, V F; Nunes, Carlos Angelo; Ramirez, Antonio Jose; Tschiptschin, André Paulo
Source: Journal of Materials Processing Technology. Unidades: EP, EEL
Subjects: FRICÇÃO, AÇO, LIGAS REFRATÁRIAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COSTA, Alex Matos da Silva et al. Ni-based Mar-M247 superalloy as a friction stir processing tool. Journal of Materials Processing Technology, v. 262, p. 605-614, 2018Tradução . . Disponível em: https://doi.org/10.1016/j.jmatprotec.2018.07.034. Acesso em: 10 jun. 2024.
APA
Costa, A. M. da S., Oliveira, J., Pereira, V. F., Nunes, C. A., Ramirez, A. J., & Tschiptschin, A. P. (2018). Ni-based Mar-M247 superalloy as a friction stir processing tool. Journal of Materials Processing Technology, 262, 605-614. doi:10.1016/j.jmatprotec.2018.07.034
NLM
Costa AM da S, Oliveira J, Pereira VF, Nunes CA, Ramirez AJ, Tschiptschin AP. Ni-based Mar-M247 superalloy as a friction stir processing tool [Internet]. Journal of Materials Processing Technology. 2018 ;262 605-614.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2018.07.034
Vancouver
Costa AM da S, Oliveira J, Pereira VF, Nunes CA, Ramirez AJ, Tschiptschin AP. Ni-based Mar-M247 superalloy as a friction stir processing tool [Internet]. Journal of Materials Processing Technology. 2018 ;262 605-614.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2018.07.034
Artigo de periodico
Manufacturing of structured surfaces via grinding (2017)
Silva, Eraldo Jannone da ; Kirsch, B.; Bottene, Alex Camilli; Simon, A.; Aurich, Jan C; Oliveira, João Fernando Gomes de
Source: Journal of Materials Processing Technology. Unidade: EESC
Subjects: RETIFICAÇÃO, REVESTIMENTOS, TRIBOLOGIA, FERRAMENTAS, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Eraldo Jannone da et al. Manufacturing of structured surfaces via grinding. Journal of Materials Processing Technology, v. 243, p. 170-183, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.jmatprotec.2016.12.009. Acesso em: 10 jun. 2024.
APA
Silva, E. J. da, Kirsch, B., Bottene, A. C., Simon, A., Aurich, J. C., & Oliveira, J. F. G. de. (2017). Manufacturing of structured surfaces via grinding. Journal of Materials Processing Technology, 243, 170-183. doi:10.1016/j.jmatprotec.2016.12.009
NLM
Silva EJ da, Kirsch B, Bottene AC, Simon A, Aurich JC, Oliveira JFG de. Manufacturing of structured surfaces via grinding [Internet]. Journal of Materials Processing Technology. 2017 ; 243 170-183.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2016.12.009
Vancouver
Silva EJ da, Kirsch B, Bottene AC, Simon A, Aurich JC, Oliveira JFG de. Manufacturing of structured surfaces via grinding [Internet]. Journal of Materials Processing Technology. 2017 ; 243 170-183.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2016.12.009
Artigo de periodico
The ultra-precision Ud-lap grinding of flat advanced ceramics (2016)
Fiocchi, Arthur Alves; Sanchez, Luiz Eduardo de Angelo; Lisboa Filho, Paulo Noronha; Fortulan, Carlos Alberto
Source: Journal of Materials Processing Technology. Unidade: EESC
Subjects: CERÂMICA AVANÇADA, PROJETO MECÂNICO, RETIFICAÇÃO, NANOTECNOLOGIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FIOCCHI, Arthur Alves et al. The ultra-precision Ud-lap grinding of flat advanced ceramics. Journal of Materials Processing Technology, v. 231, p. 336-356, 2016Tradução . . Disponível em: https://doi.org/10.1016/j.jmatprotec.2015.10.003. Acesso em: 10 jun. 2024.
APA
Fiocchi, A. A., Sanchez, L. E. de A., Lisboa Filho, P. N., & Fortulan, C. A. (2016). The ultra-precision Ud-lap grinding of flat advanced ceramics. Journal of Materials Processing Technology, 231, 336-356. doi:10.1016/j.jmatprotec.2015.10.003
NLM
Fiocchi AA, Sanchez LE de A, Lisboa Filho PN, Fortulan CA. The ultra-precision Ud-lap grinding of flat advanced ceramics [Internet]. Journal of Materials Processing Technology. 2016 ; 231 336-356.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2015.10.003
Vancouver
Fiocchi AA, Sanchez LE de A, Lisboa Filho PN, Fortulan CA. The ultra-precision Ud-lap grinding of flat advanced ceramics [Internet]. Journal of Materials Processing Technology. 2016 ; 231 336-356.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2015.10.003
Artigo de periodico
Optimal conditions for the wetting balance test (2009)
Martorano, Katia Marques; Martorano, Marcelo de Aquino ; Brandi, Sérgio Duarte
Source: Journal of Materials Processing Technology. Unidade: EP
Subjects: SOLDAGEM, AÇO FUNDIDO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTORANO, Katia Marques e MARTORANO, Marcelo de Aquino e BRANDI, Sérgio Duarte. Optimal conditions for the wetting balance test. Journal of Materials Processing Technology, v. 209, n. 6, p. 3089-3095, 2009Tradução . . Disponível em: https://doi.org/10.1016/j.jmatprotec.2008.07.015. Acesso em: 10 jun. 2024.
APA
Martorano, K. M., Martorano, M. de A., & Brandi, S. D. (2009). Optimal conditions for the wetting balance test. Journal of Materials Processing Technology, 209( 6), 3089-3095. doi:10.1016/j.jmatprotec.2008.07.015
NLM
Martorano KM, Martorano M de A, Brandi SD. Optimal conditions for the wetting balance test [Internet]. Journal of Materials Processing Technology. 2009 ; 209( 6): 3089-3095.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2008.07.015
Vancouver
Martorano KM, Martorano M de A, Brandi SD. Optimal conditions for the wetting balance test [Internet]. Journal of Materials Processing Technology. 2009 ; 209( 6): 3089-3095.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2008.07.015
Artigo de periodico
Texture and mechanical properties evolution of a deep drawing medium carbon steel during cold rolling and subsequent recrystallization (2009)
Herrera, Clara; Lima, Nelson Batista de ; Ferreira Filho, Antenor; Plaut, Ronald Lesley ; Padilha, Angelo Fernando
Source: Journal of Materials Processing Technology. Unidade: EP
Subjects: TEXTURA, PROPRIEDADES DOS MATERIAIS, AÇO CARBONO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
HERRERA, Clara et al. Texture and mechanical properties evolution of a deep drawing medium carbon steel during cold rolling and subsequent recrystallization. Journal of Materials Processing Technology, v. 209, n. 7, p. 3518-3524, 2009Tradução . . Disponível em: https://doi.org/10.1016/j.jmatprotec.2008.08.007. Acesso em: 10 jun. 2024.
APA
Herrera, C., Lima, N. B. de, Ferreira Filho, A., Plaut, R. L., & Padilha, A. F. (2009). Texture and mechanical properties evolution of a deep drawing medium carbon steel during cold rolling and subsequent recrystallization. Journal of Materials Processing Technology, 209( 7), 3518-3524. doi:10.1016/j.jmatprotec.2008.08.007
NLM
Herrera C, Lima NB de, Ferreira Filho A, Plaut RL, Padilha AF. Texture and mechanical properties evolution of a deep drawing medium carbon steel during cold rolling and subsequent recrystallization [Internet]. Journal of Materials Processing Technology. 2009 ; 209( 7): 3518-3524.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2008.08.007
Vancouver
Herrera C, Lima NB de, Ferreira Filho A, Plaut RL, Padilha AF. Texture and mechanical properties evolution of a deep drawing medium carbon steel during cold rolling and subsequent recrystallization [Internet]. Journal of Materials Processing Technology. 2009 ; 209( 7): 3518-3524.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2008.08.007
Artigo de periodico
Electrophoretic deposition of 'Ba IND.0.77''Ca IND.0.23'Ti'O IND.3' nanopowders (2008)
Antonelli, Eduardo; Silva, Ronaldo Santos; De Vicente, Fábio Simões; Zanatta, Antonio Ricardo; Hernandes, Antônio Carlos
Source: Journal of Materials Processing Technology. Unidade: IFSC
Subjects: FILMES FINOS, FERROMAGNETISMO, DIELÉTRICOS (PROPRIEDADES), BÁRIO, TITÂNIO, CÁLCIO, NANOTECNOLOGIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ANTONELLI, Eduardo et al. Electrophoretic deposition of 'Ba IND.0.77''Ca IND.0.23'Ti'O IND.3' nanopowders. Journal of Materials Processing Technology, v. 203, n. 1-3, p. 526-531, 2008Tradução . . Acesso em: 10 jun. 2024.
APA
Antonelli, E., Silva, R. S., De Vicente, F. S., Zanatta, A. R., & Hernandes, A. C. (2008). Electrophoretic deposition of 'Ba IND.0.77''Ca IND.0.23'Ti'O IND.3' nanopowders. Journal of Materials Processing Technology, 203( 1-3), 526-531.
NLM
Antonelli E, Silva RS, De Vicente FS, Zanatta AR, Hernandes AC. Electrophoretic deposition of 'Ba IND.0.77''Ca IND.0.23'Ti'O IND.3' nanopowders. Journal of Materials Processing Technology. 2008 ; 203( 1-3): 526-531.[citado 2024 jun. 10 ]
Vancouver
Antonelli E, Silva RS, De Vicente FS, Zanatta AR, Hernandes AC. Electrophoretic deposition of 'Ba IND.0.77''Ca IND.0.23'Ti'O IND.3' nanopowders. Journal of Materials Processing Technology. 2008 ; 203( 1-3): 526-531.[citado 2024 jun. 10 ]
Artigo de periodico
Experimental and theoretical study of workpiece temperature when end milling hardened steels using ('TI''AL')'N'-coated and PcBN-tipped tools (2008)
Brandão, Lincoln Cardoso; Coelho, Reginaldo Teixeira; Rodrigues, Alessandro Roger
Source: Journal of Materials Processing Technology. Unidade: EESC
Subjects: CONDUÇÃO DO CALOR, TEMPERATURA (MEDIÇÃO), GABARITOS E MOLDES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BRANDÃO, Lincoln Cardoso e COELHO, Reginaldo Teixeira e RODRIGUES, Alessandro Roger. Experimental and theoretical study of workpiece temperature when end milling hardened steels using ('TI''AL')'N'-coated and PcBN-tipped tools. Journal of Materials Processing Technology, v. 199, n. 1-3, p. 234-244, 2008Tradução . . Disponível em: https://doi.org/10.1016/j.jmatprotec.2007.07.049. Acesso em: 10 jun. 2024.
APA
Brandão, L. C., Coelho, R. T., & Rodrigues, A. R. (2008). Experimental and theoretical study of workpiece temperature when end milling hardened steels using ('TI''AL')'N'-coated and PcBN-tipped tools. Journal of Materials Processing Technology, 199( 1-3), 234-244. doi:10.1016/j.jmatprotec.2007.07.049
NLM
Brandão LC, Coelho RT, Rodrigues AR. Experimental and theoretical study of workpiece temperature when end milling hardened steels using ('TI''AL')'N'-coated and PcBN-tipped tools [Internet]. Journal of Materials Processing Technology. 2008 ; 199( 1-3): 234-244.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2007.07.049
Vancouver
Brandão LC, Coelho RT, Rodrigues AR. Experimental and theoretical study of workpiece temperature when end milling hardened steels using ('TI''AL')'N'-coated and PcBN-tipped tools [Internet]. Journal of Materials Processing Technology. 2008 ; 199( 1-3): 234-244.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2007.07.049
Artigo de periodico
Evaluating the performance for makespan minimisation in no-wait flowshop sequecing (2008)
Framinan, José M.; Nagano, Marcelo Seido
Source: Journal of Materials Processing Technology. Unidade: EESC
Subjects: ALGORITMOS GENÉTICOS, HEURÍSTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FRAMINAN, José M. e NAGANO, Marcelo Seido. Evaluating the performance for makespan minimisation in no-wait flowshop sequecing. Journal of Materials Processing Technology, v. 197, p. 1-9, 2008Tradução . . Disponível em: https://doi.org/10.1016/j.jmatprotec.2007.07.039. Acesso em: 10 jun. 2024.
APA
Framinan, J. M., & Nagano, M. S. (2008). Evaluating the performance for makespan minimisation in no-wait flowshop sequecing. Journal of Materials Processing Technology, 197, 1-9. doi:10.1016/j.jmatprotec.2007.07.039
NLM
Framinan JM, Nagano MS. Evaluating the performance for makespan minimisation in no-wait flowshop sequecing [Internet]. Journal of Materials Processing Technology. 2008 ; 197 1-9.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2007.07.039
Vancouver
Framinan JM, Nagano MS. Evaluating the performance for makespan minimisation in no-wait flowshop sequecing [Internet]. Journal of Materials Processing Technology. 2008 ; 197 1-9.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2007.07.039
Artigo de periodico
Influence of cutting conditions scaling in the machining of semiconductors crystals with single point diamond tool (2006)
Jasinevicius, Renato Goulart
Source: Journal of Materials Processing Technology. Unidade: EESC
Assunto: SEMICONDUTORES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart. Influence of cutting conditions scaling in the machining of semiconductors crystals with single point diamond tool. Journal of Materials Processing Technology, v. 179, n. 1-3, p. 11-116, 2006Tradução . . Disponível em: https://doi.org/10.1016/j.jmatprotec.2006.03.106. Acesso em: 10 jun. 2024.
APA
Jasinevicius, R. G. (2006). Influence of cutting conditions scaling in the machining of semiconductors crystals with single point diamond tool. Journal of Materials Processing Technology, 179( 1-3), 11-116. doi:10.1016/j.jmatprotec.2006.03.106
NLM
Jasinevicius RG. Influence of cutting conditions scaling in the machining of semiconductors crystals with single point diamond tool [Internet]. Journal of Materials Processing Technology. 2006 ; 179( 1-3): 11-116.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2006.03.106
Vancouver
Jasinevicius RG. Influence of cutting conditions scaling in the machining of semiconductors crystals with single point diamond tool [Internet]. Journal of Materials Processing Technology. 2006 ; 179( 1-3): 11-116.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2006.03.106
Artigo de periodico
Set-up optimization for tandem cold mills: a case study (2006)
Pires, Carlos Thadeu de Ávila; Ferreira, Henrique Cezar; Sales, Roberto Moura; Silva, M A
Source: Journal of Materials Processing Technology. Unidade: EP
Subjects: PROCESSAMENTO DE MINERAIS INDUSTRIAIS (OTIMIZAÇÃO), LAMINAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PIRES, Carlos Thadeu de Ávila et al. Set-up optimization for tandem cold mills: a case study. Journal of Materials Processing Technology, v. 173, n. 3, p. 368-375, 2006Tradução . . Disponível em: https://doi.org/10.1016/j.jmatprotec.2005.12.008. Acesso em: 10 jun. 2024.
APA
Pires, C. T. de Á., Ferreira, H. C., Sales, R. M., & Silva, M. A. (2006). Set-up optimization for tandem cold mills: a case study. Journal of Materials Processing Technology, 173( 3), 368-375. doi:10.1016/j.jmatprotec.2005.12.008
NLM
Pires CT de Á, Ferreira HC, Sales RM, Silva MA. Set-up optimization for tandem cold mills: a case study [Internet]. Journal of Materials Processing Technology. 2006 ; 173( 3): 368-375.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2005.12.008
Vancouver
Pires CT de Á, Ferreira HC, Sales RM, Silva MA. Set-up optimization for tandem cold mills: a case study [Internet]. Journal of Materials Processing Technology. 2006 ; 173( 3): 368-375.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2005.12.008
Artigo de periodico
Effect of anvil geometry on the stretching of cylinders (2006)
Buteler, Diego Ignacio; Neves, Pedro Caetano Utida; Villabón Ramos, Leonardo; Santos, C E R; Souza, Roberto Martins de ; Sinatora, Amilton
Source: Journal of Materials Processing Technology. Unidade: EP
Subjects: FORJAMENTO, PROCESSOS DE FABRICAÇÃO, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BUTELER, Diego Ignacio et al. Effect of anvil geometry on the stretching of cylinders. Journal of Materials Processing Technology, v. 179, n. 1/3, p. 50-55, 2006Tradução . . Disponível em: https://doi.org/10.1016/j.jmatprotec.2006.03.079. Acesso em: 10 jun. 2024.
APA
Buteler, D. I., Neves, P. C. U., Villabón Ramos, L., Santos, C. E. R., Souza, R. M. de, & Sinatora, A. (2006). Effect of anvil geometry on the stretching of cylinders. Journal of Materials Processing Technology, 179( 1/3), 50-55. doi:10.1016/j.jmatprotec.2006.03.079
NLM
Buteler DI, Neves PCU, Villabón Ramos L, Santos CER, Souza RM de, Sinatora A. Effect of anvil geometry on the stretching of cylinders [Internet]. Journal of Materials Processing Technology. 2006 ; 179( 1/3): 50-55.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2006.03.079
Vancouver
Buteler DI, Neves PCU, Villabón Ramos L, Santos CER, Souza RM de, Sinatora A. Effect of anvil geometry on the stretching of cylinders [Internet]. Journal of Materials Processing Technology. 2006 ; 179( 1/3): 50-55.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2006.03.079
Artigo de periodico
Development of a low cost touch trigger probe for CNC lathes (2006)
Del Guerra, Marcelo; Coelho, Reginaldo Teixeira
Source: Journal of Materials Processing Technology. Unidade: EESC
Subjects: CONTROLE DA QUALIDADE (MONITORAMENTO), USINAGEM (MEDIÇÃO), TORNOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DEL GUERRA, Marcelo e COELHO, Reginaldo Teixeira. Development of a low cost touch trigger probe for CNC lathes. Journal of Materials Processing Technology, v. 179, n. 1-3, p. 117-123, 2006Tradução . . Disponível em: https://doi.org/10.1016/j.jmatprotec.2006.03.093. Acesso em: 10 jun. 2024.
APA
Del Guerra, M., & Coelho, R. T. (2006). Development of a low cost touch trigger probe for CNC lathes. Journal of Materials Processing Technology, 179( 1-3), 117-123. doi:10.1016/j.jmatprotec.2006.03.093
NLM
Del Guerra M, Coelho RT. Development of a low cost touch trigger probe for CNC lathes [Internet]. Journal of Materials Processing Technology. 2006 ; 179( 1-3): 117-123.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2006.03.093
Vancouver
Del Guerra M, Coelho RT. Development of a low cost touch trigger probe for CNC lathes [Internet]. Journal of Materials Processing Technology. 2006 ; 179( 1-3): 117-123.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2006.03.093
Artigo de periodico
Development of new cutting fluid for grinding process adjusting mechanical performance and environmental impact (2006)
Alves, Salete Martins; Oliveira, João Fernando Gomes de
Source: Journal of Materials Processing Technology. Unidade: EESC
Subjects: RETIFICAÇÃO, FLUÍDOS REFRIGERANTES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALVES, Salete Martins e OLIVEIRA, João Fernando Gomes de. Development of new cutting fluid for grinding process adjusting mechanical performance and environmental impact. Journal of Materials Processing Technology, v. 179, n. 1-3, p. 185-189, 2006Tradução . . Disponível em: https://doi.org/10.1016/j.jmatprotec.2006.03.090. Acesso em: 10 jun. 2024.
APA
Alves, S. M., & Oliveira, J. F. G. de. (2006). Development of new cutting fluid for grinding process adjusting mechanical performance and environmental impact. Journal of Materials Processing Technology, 179( 1-3), 185-189. doi:10.1016/j.jmatprotec.2006.03.090
NLM
Alves SM, Oliveira JFG de. Development of new cutting fluid for grinding process adjusting mechanical performance and environmental impact [Internet]. Journal of Materials Processing Technology. 2006 ; 179( 1-3): 185-189.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2006.03.090
Vancouver
Alves SM, Oliveira JFG de. Development of new cutting fluid for grinding process adjusting mechanical performance and environmental impact [Internet]. Journal of Materials Processing Technology. 2006 ; 179( 1-3): 185-189.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2006.03.090
Artigo de periodico
Experimental and numerical simulation of tube hydroforming(THF) (2005)
Abrantes, Jorge Paiva; Ponce, Aline Szabo; Batalha, Gilmar Ferreira
Source: Journal of Materials Processing Technology. Unidade: EP
Subjects: PROCESSOS DE FABRICAÇÃO (ENGENHARIA MECÂNICA), CONFORMAÇÃO MECÂNICA, TUBOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ABRANTES, Jorge Paiva e PONCE, Aline Szabo e BATALHA, Gilmar Ferreira. Experimental and numerical simulation of tube hydroforming(THF). Journal of Materials Processing Technology, v. 164-165, p. 1140-1147, 2005Tradução . . Disponível em: https://doi.org/10.1016/j.jmatprotec.2005.02.117. Acesso em: 10 jun. 2024.
APA
Abrantes, J. P., Ponce, A. S., & Batalha, G. F. (2005). Experimental and numerical simulation of tube hydroforming(THF). Journal of Materials Processing Technology, 164-165, 1140-1147. doi:10.1016/j.jmatprotec.2005.02.117
NLM
Abrantes JP, Ponce AS, Batalha GF. Experimental and numerical simulation of tube hydroforming(THF) [Internet]. Journal of Materials Processing Technology. 2005 ; 164-165 1140-1147.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2005.02.117
Vancouver
Abrantes JP, Ponce AS, Batalha GF. Experimental and numerical simulation of tube hydroforming(THF) [Internet]. Journal of Materials Processing Technology. 2005 ; 164-165 1140-1147.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2005.02.117
Artigo de periodico
The use of Nd:YAG laser weld for large scale volume assembly of automotive body in white (2005)
Ribolla, Adriano; Damoulis, Gleiton Luiz; Batalha, Gilmar Ferreira
Source: Journal of Materials Processing Technology. Unidade: EP
Subjects: SOLDAGEM, PROCESSOS DE FABRICAÇÃO (ENGENHARIA MECÂNICA), MANUFATURA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBOLLA, Adriano e DAMOULIS, Gleiton Luiz e BATALHA, Gilmar Ferreira. The use of Nd:YAG laser weld for large scale volume assembly of automotive body in white. Journal of Materials Processing Technology, v. 164-165, p. 1120-1127, 2005Tradução . . Disponível em: https://doi.org/10.1016/j.jmatprotec.2005.02.104. Acesso em: 10 jun. 2024.
APA
Ribolla, A., Damoulis, G. L., & Batalha, G. F. (2005). The use of Nd:YAG laser weld for large scale volume assembly of automotive body in white. Journal of Materials Processing Technology, 164-165, 1120-1127. doi:10.1016/j.jmatprotec.2005.02.104
NLM
Ribolla A, Damoulis GL, Batalha GF. The use of Nd:YAG laser weld for large scale volume assembly of automotive body in white [Internet]. Journal of Materials Processing Technology. 2005 ; 164-165 1120-1127.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2005.02.104
Vancouver
Ribolla A, Damoulis GL, Batalha GF. The use of Nd:YAG laser weld for large scale volume assembly of automotive body in white [Internet]. Journal of Materials Processing Technology. 2005 ; 164-165 1120-1127.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2005.02.104
Artigo de periodico
Microstructures and mechanical properties of Fe-15% Cr-15% Ni austenitic stainless steels containing different levels of niobium additions submitted to various processing stages (2005)
Padilha, Angelo Fernando ; Machado, Izabel Fernanda ; Plaut, Ronald Lesley
Source: Journal of Materials Processing Technology. Unidade: EP
Subjects: NIÓBIO, AÇO INOXIDÁVEL AUSTENÍTICO, MATERIAIS (PROPRIEDADES MECÂNICAS)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PADILHA, Angelo Fernando e MACHADO, Izabel Fernanda e PLAUT, Ronald Lesley. Microstructures and mechanical properties of Fe-15% Cr-15% Ni austenitic stainless steels containing different levels of niobium additions submitted to various processing stages. Journal of Materials Processing Technology, v. 170, p. 89-96, 2005Tradução . . Disponível em: https://doi.org/10.1016/j.jmatprotec.2005.05.002. Acesso em: 10 jun. 2024.
APA
Padilha, A. F., Machado, I. F., & Plaut, R. L. (2005). Microstructures and mechanical properties of Fe-15% Cr-15% Ni austenitic stainless steels containing different levels of niobium additions submitted to various processing stages. Journal of Materials Processing Technology, 170, 89-96. doi:10.1016/j.jmatprotec.2005.05.002
NLM
Padilha AF, Machado IF, Plaut RL. Microstructures and mechanical properties of Fe-15% Cr-15% Ni austenitic stainless steels containing different levels of niobium additions submitted to various processing stages [Internet]. Journal of Materials Processing Technology. 2005 ; 170 89-96.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2005.05.002
Vancouver
Padilha AF, Machado IF, Plaut RL. Microstructures and mechanical properties of Fe-15% Cr-15% Ni austenitic stainless steels containing different levels of niobium additions submitted to various processing stages [Internet]. Journal of Materials Processing Technology. 2005 ; 170 89-96.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2005.05.002
Artigo de periodico
Thixoextrusion of an A356 alloy: microstructural studies and high temperature fatigue behaviour (2004)
Freitas, Emerson Reginaldo; Ferrante, Maurízio; Silva, Valdinei Ferreira da; Bose Filho, Waldek Wladimir; Spinelli, Dirceu
Source: Journal of Materials Processing Technology. Unidade: EESC
Subjects: FADIGA DOS MATERIAIS, LIGAS RESISTENTES AO CALOR
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FREITAS, Emerson Reginaldo et al. Thixoextrusion of an A356 alloy: microstructural studies and high temperature fatigue behaviour. Journal of Materials Processing Technology, v. No 2004, p. 1629-1633, 2004Tradução . . Disponível em: https://doi.org/10.1016/j.jmatprotec.2004.04.314. Acesso em: 10 jun. 2024.
APA
Freitas, E. R., Ferrante, M., Silva, V. F. da, Bose Filho, W. W., & Spinelli, D. (2004). Thixoextrusion of an A356 alloy: microstructural studies and high temperature fatigue behaviour. Journal of Materials Processing Technology, No 2004, 1629-1633. doi:10.1016/j.jmatprotec.2004.04.314
NLM
Freitas ER, Ferrante M, Silva VF da, Bose Filho WW, Spinelli D. Thixoextrusion of an A356 alloy: microstructural studies and high temperature fatigue behaviour [Internet]. Journal of Materials Processing Technology. 2004 ; No 2004 1629-1633.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2004.04.314
Vancouver
Freitas ER, Ferrante M, Silva VF da, Bose Filho WW, Spinelli D. Thixoextrusion of an A356 alloy: microstructural studies and high temperature fatigue behaviour [Internet]. Journal of Materials Processing Technology. 2004 ; No 2004 1629-1633.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2004.04.314
Artigo de periodico
Some effects of cutting edge preparation and geometric modifications when turning INCONEL 718TM at high cutting speeds (2004)
Coelho, Reginaldo Teixeira; Silva, Leonardo Ribeiro; Braghini Junior, Aldo; Bezerra, Alexandre Araújo
Source: Journal of Materials Processing Technology. Unidade: EESC
Subjects: LIGAS METÁLICAS, TENSÃO RESIDUAL, RUGOSIDADE SUPERFICIAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COELHO, Reginaldo Teixeira et al. Some effects of cutting edge preparation and geometric modifications when turning INCONEL 718TM at high cutting speeds. Journal of Materials Processing Technology, v. 148, n. 1, p. 147-153, 2004Tradução . . Disponível em: https://doi.org/10.1016/j.jmatprotec.2004.02.001. Acesso em: 10 jun. 2024.
APA
Coelho, R. T., Silva, L. R., Braghini Junior, A., & Bezerra, A. A. (2004). Some effects of cutting edge preparation and geometric modifications when turning INCONEL 718TM at high cutting speeds. Journal of Materials Processing Technology, 148( 1), 147-153. doi:10.1016/j.jmatprotec.2004.02.001
NLM
Coelho RT, Silva LR, Braghini Junior A, Bezerra AA. Some effects of cutting edge preparation and geometric modifications when turning INCONEL 718TM at high cutting speeds [Internet]. Journal of Materials Processing Technology. 2004 ; 148( 1): 147-153.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2004.02.001
Vancouver
Coelho RT, Silva LR, Braghini Junior A, Bezerra AA. Some effects of cutting edge preparation and geometric modifications when turning INCONEL 718TM at high cutting speeds [Internet]. Journal of Materials Processing Technology. 2004 ; 148( 1): 147-153.[citado 2024 jun. 10 ] Available from: https://doi.org/10.1016/j.jmatprotec.2004.02.001

USP Schools

ReP

Filtros

Departament

Authors

USP affiliated authors

Date published

Subjects

Indexado em

Non normalized affiliation