Filtros : "EP" "Indexado no Inspec" Limpar

Filtros



Refine with date range


  • Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidades: EESC, EP

    Subjects: MOTORES DE COMBUSTÃO INTERNA, VEÍCULOS ELÉTRICOS, DINÂMICA VEICULAR, ENGENHARIA MECÂNICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      MARINI, Vinicius K. et al. Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 46, p. 1-14, 2024Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-023-04604-0. Acesso em: 29 mar. 2024.
    • APA

      Marini, V. K., Sorban, B. A., Silva, M. M. da, Bortolussi, R., Fleury, A. de T., & Trigo, F. C. (2024). Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46, 1-14. doi:10.1007/s40430-023-04604-0
    • NLM

      Marini VK, Sorban BA, Silva MM da, Bortolussi R, Fleury A de T, Trigo FC. Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-14.[citado 2024 mar. 29 ] Available from: https://dx.doi.org/10.1007/s40430-023-04604-0
    • Vancouver

      Marini VK, Sorban BA, Silva MM da, Bortolussi R, Fleury A de T, Trigo FC. Numerical hazard analysis of torque vectoring system for electric drivetrain considering handling uncertainty [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 ; 46 1-14.[citado 2024 mar. 29 ] Available from: https://dx.doi.org/10.1007/s40430-023-04604-0
  • Source: Applied Ocean Research. Unidades: EP, ICMC

    Subjects: ANÁLISE ESTOCÁSTICA, SISTEMAS NÃO LINEARES, HIDRODINÂMICA, ONDAS (OCEANOGRAFIA)

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      SILVA, Leandro Souza Pinheiro da et al. Stochastic analysis of the nonlinear dynamics of oscillating water columns: a frequency domain approach. Applied Ocean Research, v. 139, p. 1-10, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.apor.2023.103711. Acesso em: 29 mar. 2024.
    • APA

      Silva, L. S. P. da, Pesce, C. P., Oliveira, M. de, Sergiienko, N. Y., Cazzolato, B. S., & Ding, B. (2023). Stochastic analysis of the nonlinear dynamics of oscillating water columns: a frequency domain approach. Applied Ocean Research, 139, 1-10. doi:10.1016/j.apor.2023.103711
    • NLM

      Silva LSP da, Pesce CP, Oliveira M de, Sergiienko NY, Cazzolato BS, Ding B. Stochastic analysis of the nonlinear dynamics of oscillating water columns: a frequency domain approach [Internet]. Applied Ocean Research. 2023 ; 139 1-10.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.apor.2023.103711
    • Vancouver

      Silva LSP da, Pesce CP, Oliveira M de, Sergiienko NY, Cazzolato BS, Ding B. Stochastic analysis of the nonlinear dynamics of oscillating water columns: a frequency domain approach [Internet]. Applied Ocean Research. 2023 ; 139 1-10.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.apor.2023.103711
  • Source: Engineering Fracture Mechanics. Unidade: EP

    Subjects: USINAGEM, DUCTILIDADE, MATERIAIS, MECÂNICA DA FRATURA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      MISCIONE, Juan Manuel Costa e RAMIREZ, Bruna Niccoli e SCHÖN, Cláudio Geraldo. A ductile damage evolution model for the simulation of machining processes in materials with limited ductility. Engineering Fracture Mechanics, v. 271, n. ju 2022, p. 18 , 2022Tradução . . Disponível em: https://doi.org/10.1016/j.engfracmech.2022.108602. Acesso em: 29 mar. 2024.
    • APA

      Miscione, J. M. C., Ramirez, B. N., & Schön, C. G. (2022). A ductile damage evolution model for the simulation of machining processes in materials with limited ductility. Engineering Fracture Mechanics, 271( ju 2022), 18 . doi:10.1016/j.engfracmech.2022.108602
    • NLM

      Miscione JMC, Ramirez BN, Schön CG. A ductile damage evolution model for the simulation of machining processes in materials with limited ductility [Internet]. Engineering Fracture Mechanics. 2022 ; 271( ju 2022): 18 .[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.engfracmech.2022.108602
    • Vancouver

      Miscione JMC, Ramirez BN, Schön CG. A ductile damage evolution model for the simulation of machining processes in materials with limited ductility [Internet]. Engineering Fracture Mechanics. 2022 ; 271( ju 2022): 18 .[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.engfracmech.2022.108602
  • Source: International Journal of Advanced Manufacturing Technology. Unidade: EP

    Subjects: SOLDAGEM POR FRICÇÃO, AÇO

    PrivadoAcesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      SOEIRO JUNIOR, Jaime Casanova et al. Microstructure and mechanical properties of 9% nickel steel welded by FSW. International Journal of Advanced Manufacturing Technology, v. 111, p. 3225-3240, 2020Tradução . . Disponível em: https://doi.org/10.1007/s00170-020-06313-7. Acesso em: 29 mar. 2024.
    • APA

      Soeiro Junior, J. C., Sorger, G., Silva, P. S. V. da, & Brandi, S. D. (2020). Microstructure and mechanical properties of 9% nickel steel welded by FSW. International Journal of Advanced Manufacturing Technology, 111, 3225-3240. doi:10.1007/s00170-020-06313-7
    • NLM

      Soeiro Junior JC, Sorger G, Silva PSV da, Brandi SD. Microstructure and mechanical properties of 9% nickel steel welded by FSW [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ; 111 3225-3240.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1007/s00170-020-06313-7
    • Vancouver

      Soeiro Junior JC, Sorger G, Silva PSV da, Brandi SD. Microstructure and mechanical properties of 9% nickel steel welded by FSW [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ; 111 3225-3240.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1007/s00170-020-06313-7
  • Source: International Journal of Hydrogen Energy. Unidades: EESC, EP

    Subjects: BIOENERGIA, FERMENTAÇÃO LÁTICA, ENGENHARIA HIDRÁULICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      OLIVEIRA, Cristiane Arruda de et al. Thermophilic biohydrogen production from sugarcane molasses under low pH: metabolic and microbial aspects. International Journal of Hydrogen Energy, v. 45, n. 7, p. 4182-4192, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.ijhydene.2019.12.013. Acesso em: 29 mar. 2024.
    • APA

      Oliveira, C. A. de, Fuess, L. T., Soares, L. A., & Damianovic, M. H. R. Z. (2020). Thermophilic biohydrogen production from sugarcane molasses under low pH: metabolic and microbial aspects. International Journal of Hydrogen Energy, 45( 7), 4182-4192. doi:10.1016/j.ijhydene.2019.12.013
    • NLM

      Oliveira CA de, Fuess LT, Soares LA, Damianovic MHRZ. Thermophilic biohydrogen production from sugarcane molasses under low pH: metabolic and microbial aspects [Internet]. International Journal of Hydrogen Energy. 2020 ; 45( 7): 4182-4192.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.ijhydene.2019.12.013
    • Vancouver

      Oliveira CA de, Fuess LT, Soares LA, Damianovic MHRZ. Thermophilic biohydrogen production from sugarcane molasses under low pH: metabolic and microbial aspects [Internet]. International Journal of Hydrogen Energy. 2020 ; 45( 7): 4182-4192.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.ijhydene.2019.12.013
  • Source: Engineering Fracture Mechanics. Unidade: EP

    Subjects: MECÂNICA DA FRATURA, FADIGA DOS MATERIAIS, DEFORMAÇÃO E ESTRESSES

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      AFZALIMIR, Seyed Hamidreza e BARBOSA, Vitor Scarabeli e RUGGIERI, Claudio. Evaluation of CTOD resistance curves in clamped SE(T) specimens with weld centerline cracks. Engineering Fracture Mechanics, v. 195, p. 297-312, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.engfracmech.2020.107326. Acesso em: 29 mar. 2024.
    • APA

      Afzalimir, S. H., Barbosa, V. S., & Ruggieri, C. (2020). Evaluation of CTOD resistance curves in clamped SE(T) specimens with weld centerline cracks. Engineering Fracture Mechanics, 195, 297-312. doi:10.1016/j.engfracmech.2020.107326
    • NLM

      Afzalimir SH, Barbosa VS, Ruggieri C. Evaluation of CTOD resistance curves in clamped SE(T) specimens with weld centerline cracks [Internet]. Engineering Fracture Mechanics. 2020 ; 195 297-312.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.engfracmech.2020.107326
    • Vancouver

      Afzalimir SH, Barbosa VS, Ruggieri C. Evaluation of CTOD resistance curves in clamped SE(T) specimens with weld centerline cracks [Internet]. Engineering Fracture Mechanics. 2020 ; 195 297-312.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.engfracmech.2020.107326
  • Source: Engineering Fracture Mechanics. Unidade: EP

    Subjects: MECÂNICA DA FRATURA, FADIGA DOS MATERIAIS, DEFORMAÇÃO E ESTRESSES

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      BARBOSA, Vitor Scarabeli e RUGGIERI, Claudio. Fracture toughness testing using non-standard bend specimens – Part II: Experiments and evaluation T0 reference temperature for a low alloy structural steel. Engineering Fracture Mechanics, v. 195, p. 297-312, 2018Tradução . . Disponível em: https://doi.org/10.1016/j.engfracmech.2018.03.028. Acesso em: 29 mar. 2024.
    • APA

      Barbosa, V. S., & Ruggieri, C. (2018). Fracture toughness testing using non-standard bend specimens – Part II: Experiments and evaluation T0 reference temperature for a low alloy structural steel. Engineering Fracture Mechanics, 195, 297-312. doi:10.1016/j.engfracmech.2018.03.028
    • NLM

      Barbosa VS, Ruggieri C. Fracture toughness testing using non-standard bend specimens – Part II: Experiments and evaluation T0 reference temperature for a low alloy structural steel [Internet]. Engineering Fracture Mechanics. 2018 ; 195 297-312.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.engfracmech.2018.03.028
    • Vancouver

      Barbosa VS, Ruggieri C. Fracture toughness testing using non-standard bend specimens – Part II: Experiments and evaluation T0 reference temperature for a low alloy structural steel [Internet]. Engineering Fracture Mechanics. 2018 ; 195 297-312.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.engfracmech.2018.03.028
  • Source: Engineering Fracture Mechanics. Unidade: EP

    Subjects: MECÂNICA DA FRATURA, FADIGA DOS MATERIAIS, TENACIDADE DOS MATERIAIS

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      BARBOSA, Vitor Scarabeli e RUGGIERI, Claudio. Fracture toughness testing using non-standard bend specimens – Part I: Constraint effects and development of test procedure. Engineering Fracture Mechanics, v. 195, p. 279-296, 2018Tradução . . Disponível em: https://doi.org/10.1016/j.engfracmech.2018.03.029. Acesso em: 29 mar. 2024.
    • APA

      Barbosa, V. S., & Ruggieri, C. (2018). Fracture toughness testing using non-standard bend specimens – Part I: Constraint effects and development of test procedure. Engineering Fracture Mechanics, 195, 279-296. doi:10.1016/j.engfracmech.2018.03.029
    • NLM

      Barbosa VS, Ruggieri C. Fracture toughness testing using non-standard bend specimens – Part I: Constraint effects and development of test procedure [Internet]. Engineering Fracture Mechanics. 2018 ; 195 279-296.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.engfracmech.2018.03.029
    • Vancouver

      Barbosa VS, Ruggieri C. Fracture toughness testing using non-standard bend specimens – Part I: Constraint effects and development of test procedure [Internet]. Engineering Fracture Mechanics. 2018 ; 195 279-296.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.engfracmech.2018.03.029
  • Source: Expert Systems. Unidade: EP

    Subjects: COMBUSTÃO, FORNO A ÓLEO, FORNO (MONITORAMENTO), REFINARIAS

    PrivadoAcesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      FLEURY, Agenor de Toledo et al. An inference model for combustion diagnostics in an experimental oil furnace. Expert Systems, v. 35, n. 2, p. 1-18, 2018Tradução . . Disponível em: https://doi.org/10.1111/exsy.12245. Acesso em: 29 mar. 2024.
    • APA

      Fleury, A. de T., Trigo, F. C., Pacifico, A. L., & Martins, F. P. R. (2018). An inference model for combustion diagnostics in an experimental oil furnace. Expert Systems, 35( 2), 1-18. doi:10.1111/exsy.12245
    • NLM

      Fleury A de T, Trigo FC, Pacifico AL, Martins FPR. An inference model for combustion diagnostics in an experimental oil furnace [Internet]. Expert Systems. 2018 ; 35( 2): 1-18.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1111/exsy.12245
    • Vancouver

      Fleury A de T, Trigo FC, Pacifico AL, Martins FPR. An inference model for combustion diagnostics in an experimental oil furnace [Internet]. Expert Systems. 2018 ; 35( 2): 1-18.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1111/exsy.12245
  • Source: International Journal for Computation and Mathematics in Electrical and Electronic Engineering. Unidade: EP

    Subjects: PROBLEMAS INVERSOS, TOMOGRAFIA, IMPEDÂNCIA ELÉTRICA

    PrivadoAcesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      PELLEGRINI, Sérgio de Paula e TRIGO, Flávio Celso e GONZÁLEZ LIMA, Raúl. Solving the electrical impedance tomography inverse problem for logarithm conductivity numerical sensitivity. International Journal for Computation and Mathematics in Electrical and Electronic Engineering, v. 37, n. 2, p. 681-690, 2018Tradução . . Disponível em: https://doi.org/10.1108/COMPEL-11-2016-0501. Acesso em: 29 mar. 2024.
    • APA

      Pellegrini, S. de P., Trigo, F. C., & González Lima, R. (2018). Solving the electrical impedance tomography inverse problem for logarithm conductivity numerical sensitivity. International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 37( 2), 681-690. doi:10.1108/COMPEL-11-2016-0501
    • NLM

      Pellegrini S de P, Trigo FC, González Lima R. Solving the electrical impedance tomography inverse problem for logarithm conductivity numerical sensitivity [Internet]. International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 2018 ; 37( 2): 681-690.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1108/COMPEL-11-2016-0501
    • Vancouver

      Pellegrini S de P, Trigo FC, González Lima R. Solving the electrical impedance tomography inverse problem for logarithm conductivity numerical sensitivity [Internet]. International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 2018 ; 37( 2): 681-690.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1108/COMPEL-11-2016-0501
  • Source: International Journal of Electrical Power and Energy Systems. Unidades: EESC, EP

    Subjects: LÓGICA FUZZY, REDES DE DISTRIBUIÇÃO DE ENERGIA ELÉTRICA, ENGENHARIA ELÉTRICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      FONSECA SOBRINHO, André Sanches et al. Proposal of a fuzzy-based PMU for detection and classification of disturbances in power distribution networks. International Journal of Electrical Power and Energy Systems, v. 94, n. Ja 2018, p. 27-40, 2018Tradução . . Disponível em: https://doi.org/10.1016/j.ijepes.2017.06.023. Acesso em: 29 mar. 2024.
    • APA

      Fonseca Sobrinho, A. S., Flauzino, R. A., Liboni, L. H. B., & Costa, E. C. M. da. (2018). Proposal of a fuzzy-based PMU for detection and classification of disturbances in power distribution networks. International Journal of Electrical Power and Energy Systems, 94( Ja 2018), 27-40. doi:10.1016/j.ijepes.2017.06.023
    • NLM

      Fonseca Sobrinho AS, Flauzino RA, Liboni LHB, Costa ECM da. Proposal of a fuzzy-based PMU for detection and classification of disturbances in power distribution networks [Internet]. International Journal of Electrical Power and Energy Systems. 2018 ; 94( Ja 2018): 27-40.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.ijepes.2017.06.023
    • Vancouver

      Fonseca Sobrinho AS, Flauzino RA, Liboni LHB, Costa ECM da. Proposal of a fuzzy-based PMU for detection and classification of disturbances in power distribution networks [Internet]. International Journal of Electrical Power and Energy Systems. 2018 ; 94( Ja 2018): 27-40.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.ijepes.2017.06.023
  • Source: International Journal of Electrical Power and Energy Systems. Unidades: EESC, EP

    Subjects: FILTROS DE KALMAN, ENGENHARIA ELÉTRICA

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      LIBONI, Luisa Helena Bartocci e OLIVEIRA, Mauricio C. de e SILVA, Ivan Nunes da. On the problem of optimal estimation of balanced and symmetric three-phase signals. International Journal of Electrical Power and Energy Systems, v. 91, p. 155-165, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.ijepes.2017.03.002. Acesso em: 29 mar. 2024.
    • APA

      Liboni, L. H. B., Oliveira, M. C. de, & Silva, I. N. da. (2017). On the problem of optimal estimation of balanced and symmetric three-phase signals. International Journal of Electrical Power and Energy Systems, 91, 155-165. doi:10.1016/j.ijepes.2017.03.002
    • NLM

      Liboni LHB, Oliveira MC de, Silva IN da. On the problem of optimal estimation of balanced and symmetric three-phase signals [Internet]. International Journal of Electrical Power and Energy Systems. 2017 ; 91 155-165.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.ijepes.2017.03.002
    • Vancouver

      Liboni LHB, Oliveira MC de, Silva IN da. On the problem of optimal estimation of balanced and symmetric three-phase signals [Internet]. International Journal of Electrical Power and Energy Systems. 2017 ; 91 155-165.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.ijepes.2017.03.002
  • Source: Engineering Fracture Mechanics. Unidade: EP

    Subjects: MECÂNICA DA FRATURA, TENSÃO DE WEIBULL, TENACIDADE DOS MATERIAIS

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      WEI-SHENG, Lei et al. A discussion of "an engineering methodology for constraint corrections of elastic-plastic fracture toughness - Part II: Effects of specimen geometry and plastic strain on cleavage fracture predictions” by C. Ruggieri, R.G. Savioli, R.H. Dodds [Eng. Fract. Mech. 146 (2015) 185–209]. Engineering Fracture Mechanics, v. 178, n. ju 2017, p. 527-534, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.engfracmech.2016.02.052USP/SIBI. Acesso em: 29 mar. 2024.
    • APA

      Wei-Sheng, L., Ruggieri, C., Savioli, R. G., & Dodds, R. H. (2017). A discussion of "an engineering methodology for constraint corrections of elastic-plastic fracture toughness - Part II: Effects of specimen geometry and plastic strain on cleavage fracture predictions” by C. Ruggieri, R.G. Savioli, R.H. Dodds [Eng. Fract. Mech. 146 (2015) 185–209]. Engineering Fracture Mechanics, 178( ju 2017), 527-534. doi:10.1016/j.engfracmech.2016.02.052USP/SIBI
    • NLM

      Wei-Sheng L, Ruggieri C, Savioli RG, Dodds RH. A discussion of "an engineering methodology for constraint corrections of elastic-plastic fracture toughness - Part II: Effects of specimen geometry and plastic strain on cleavage fracture predictions” by C. Ruggieri, R.G. Savioli, R.H. Dodds [Eng. Fract. Mech. 146 (2015) 185–209] [Internet]. Engineering Fracture Mechanics. 2017 ; 178( ju 2017): 527-534.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.engfracmech.2016.02.052USP/SIBI
    • Vancouver

      Wei-Sheng L, Ruggieri C, Savioli RG, Dodds RH. A discussion of "an engineering methodology for constraint corrections of elastic-plastic fracture toughness - Part II: Effects of specimen geometry and plastic strain on cleavage fracture predictions” by C. Ruggieri, R.G. Savioli, R.H. Dodds [Eng. Fract. Mech. 146 (2015) 185–209] [Internet]. Engineering Fracture Mechanics. 2017 ; 178( ju 2017): 527-534.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.engfracmech.2016.02.052USP/SIBI
  • Source: Engineering Fracture Mechanics. Unidade: EP

    Subjects: MECÂNICA DA FRATURA, RESISTÊNCIA DOS MATERIAIS, FADIGA DOS MATERIAIS, TENACIDADE DOS MATERIAIS

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      SOUZA, Rodolfo Ferronatto de e RUGGIERI, Claudio. Revised wide range compliance solutions for selected standard and non-standard fracture test specimens based on crack mouth opening displacement. Engineering Fracture Mechanics, v. 178, p. 77-92, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.engfracmech.2017.04.013. Acesso em: 29 mar. 2024.
    • APA

      Souza, R. F. de, & Ruggieri, C. (2017). Revised wide range compliance solutions for selected standard and non-standard fracture test specimens based on crack mouth opening displacement. Engineering Fracture Mechanics, 178, 77-92. doi:10.1016/j.engfracmech.2017.04.013
    • NLM

      Souza RF de, Ruggieri C. Revised wide range compliance solutions for selected standard and non-standard fracture test specimens based on crack mouth opening displacement [Internet]. Engineering Fracture Mechanics. 2017 ; 178 77-92.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.engfracmech.2017.04.013
    • Vancouver

      Souza RF de, Ruggieri C. Revised wide range compliance solutions for selected standard and non-standard fracture test specimens based on crack mouth opening displacement [Internet]. Engineering Fracture Mechanics. 2017 ; 178 77-92.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.engfracmech.2017.04.013
  • Source: Journal of Cleaner Production. Unidade: EP

    Subjects: IMPACTOS AMBIENTAIS, MINERAÇÃO, QUALIDADE DO AR, DEPÓSITOS MINERAIS, FERRO

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      NERI, Ana Claudia e DUPIN, Patrícia e SÁNCHEZ, Luis Enrique. A pressure-state-response approach to cumulative impact assessment. Journal of Cleaner Production, v. 126, p. 288-298, 2016Tradução . . Disponível em: https://doi.org/10.1016/j.jclepro.2016.02.134. Acesso em: 29 mar. 2024.
    • APA

      Neri, A. C., Dupin, P., & Sánchez, L. E. (2016). A pressure-state-response approach to cumulative impact assessment. Journal of Cleaner Production, 126, 288-298. doi:10.1016/j.jclepro.2016.02.134
    • NLM

      Neri AC, Dupin P, Sánchez LE. A pressure-state-response approach to cumulative impact assessment [Internet]. Journal of Cleaner Production. 2016 ;126 288-298.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.jclepro.2016.02.134
    • Vancouver

      Neri AC, Dupin P, Sánchez LE. A pressure-state-response approach to cumulative impact assessment [Internet]. Journal of Cleaner Production. 2016 ;126 288-298.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.jclepro.2016.02.134
  • Source: Control Engineering Practice. Unidade: EP

    Subjects: SISTEMAS DE MANUFATURAS, REDES DE PETRI, ARQUITETURA ORIENTADA A SERVIÇOS, SISTEMAS MULTIAGENTES

    PrivadoAcesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      SILVA, Robson Marinho da et al. Control architecture and design method of reconfigurable manufacturing systems. Control Engineering Practice, v. 49, p. 87-100, 2016Tradução . . Disponível em: https://doi.org/10.1016/j.conengprac.2016.01.009. Acesso em: 29 mar. 2024.
    • APA

      Silva, R. M. da, Junqueira, F., Santos Filho, D. J. dos, & Miyagi, P. E. (2016). Control architecture and design method of reconfigurable manufacturing systems. Control Engineering Practice, 49, 87-100. doi:10.1016/j.conengprac.2016.01.009
    • NLM

      Silva RM da, Junqueira F, Santos Filho DJ dos, Miyagi PE. Control architecture and design method of reconfigurable manufacturing systems [Internet]. Control Engineering Practice. 2016 ; 49 87-100.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.conengprac.2016.01.009
    • Vancouver

      Silva RM da, Junqueira F, Santos Filho DJ dos, Miyagi PE. Control architecture and design method of reconfigurable manufacturing systems [Internet]. Control Engineering Practice. 2016 ; 49 87-100.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.conengprac.2016.01.009
  • Source: Journal of Cleaner Production. Unidade: EP

    Subjects: MINERAÇÃO DE MINERAIS METÁLICOS, OURO

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      BALZINO, Michela et al. Gold losses and mercury recovery in artisanal gold mining on the Madeira River, Brazil. Journal of Cleaner Production, v. 102, p. 370-377, 2015Tradução . . Disponível em: https://doi.org/10.1016/j.jclepro.2015.05.012. Acesso em: 29 mar. 2024.
    • APA

      Balzino, M., Seccatore, J., Marin, T., De Tomi, G. F. C., & Veiga, M. M. da. (2015). Gold losses and mercury recovery in artisanal gold mining on the Madeira River, Brazil. Journal of Cleaner Production, 102, 370-377. doi:10.1016/j.jclepro.2015.05.012
    • NLM

      Balzino M, Seccatore J, Marin T, De Tomi GFC, Veiga MM da. Gold losses and mercury recovery in artisanal gold mining on the Madeira River, Brazil [Internet]. Journal of Cleaner Production. 2015 ; 102 370-377.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.jclepro.2015.05.012
    • Vancouver

      Balzino M, Seccatore J, Marin T, De Tomi GFC, Veiga MM da. Gold losses and mercury recovery in artisanal gold mining on the Madeira River, Brazil [Internet]. Journal of Cleaner Production. 2015 ; 102 370-377.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.jclepro.2015.05.012
  • Source: Precision Engineering. Unidade: EP

    Subjects: NORMAS TÉCNICAS, TRIBOLOGIA, RUGOSIDADE SUPERFICIAL

    PrivadoAcesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      FRANCO, Luiz Alberto Pereira das Neves e SINATORA, Amilton. 3 D surface parameters (ISO 25178-2): actual meaning of Spk and its relationship to Vmp. Precision Engineering, v. 40, p. 106-11, 2015Tradução . . Disponível em: https://doi.org/10.1016/j.precisioneng.2014.10.011. Acesso em: 29 mar. 2024.
    • APA

      Franco, L. A. P. das N., & Sinatora, A. (2015). 3 D surface parameters (ISO 25178-2): actual meaning of Spk and its relationship to Vmp. Precision Engineering, 40, 106-11. doi:10.1016/j.precisioneng.2014.10.011
    • NLM

      Franco LAP das N, Sinatora A. 3 D surface parameters (ISO 25178-2): actual meaning of Spk and its relationship to Vmp [Internet]. Precision Engineering. 2015 ; 40 106-11.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.precisioneng.2014.10.011
    • Vancouver

      Franco LAP das N, Sinatora A. 3 D surface parameters (ISO 25178-2): actual meaning of Spk and its relationship to Vmp [Internet]. Precision Engineering. 2015 ; 40 106-11.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1016/j.precisioneng.2014.10.011
  • Source: Lubrication Science. Unidade: EP

    Subjects: LUBRIFICAÇÃO, FRICÇÃO, DESGASTE DOS MATERIAIS

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      TRINDADE, Eduardo Dominguez e DURANGO, Alexander Zuleta e SINATORA, Amilton. Friction and wear performance of MoDTC-containing and ester-containing lubricants over steel surfaces under reciprocating conditions. Lubrication Science, v. 27, n. 4, p. 217-229, 2015Tradução . . Disponível em: https://doi.org/10.1002/ls.1270. Acesso em: 29 mar. 2024.
    • APA

      Trindade, E. D., Durango, A. Z., & Sinatora, A. (2015). Friction and wear performance of MoDTC-containing and ester-containing lubricants over steel surfaces under reciprocating conditions. Lubrication Science, 27( 4), 217-229. doi:10.1002/ls.1270
    • NLM

      Trindade ED, Durango AZ, Sinatora A. Friction and wear performance of MoDTC-containing and ester-containing lubricants over steel surfaces under reciprocating conditions [Internet]. Lubrication Science. 2015 ; 27( 4): 217-229.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1002/ls.1270
    • Vancouver

      Trindade ED, Durango AZ, Sinatora A. Friction and wear performance of MoDTC-containing and ester-containing lubricants over steel surfaces under reciprocating conditions [Internet]. Lubrication Science. 2015 ; 27( 4): 217-229.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1002/ls.1270
  • Source: IEEE Transactions on Computational Intelligence and AI in Games. Unidade: EP

    Subjects: APRENDIZADO COMPUTACIONAL, JOGOS DE COMPUTADOR

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      CASTRO, Emiliano Gonçalves de e TSUZUKI, Marcos de Sales Guerra. Churn prediction in online games using players login records: frequency analysis approach. IEEE Transactions on Computational Intelligence and AI in Games, v. 7, n. 3, p. 255-265, 2015Tradução . . Disponível em: https://doi.org/10.1109/TCIAIG.2015.2401979. Acesso em: 29 mar. 2024.
    • APA

      Castro, E. G. de, & Tsuzuki, M. de S. G. (2015). Churn prediction in online games using players login records: frequency analysis approach. IEEE Transactions on Computational Intelligence and AI in Games, 7( 3), 255-265. doi:10.1109/TCIAIG.2015.2401979
    • NLM

      Castro EG de, Tsuzuki M de SG. Churn prediction in online games using players login records: frequency analysis approach [Internet]. IEEE Transactions on Computational Intelligence and AI in Games. 2015 ; 7( 3): 255-265.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1109/TCIAIG.2015.2401979
    • Vancouver

      Castro EG de, Tsuzuki M de SG. Churn prediction in online games using players login records: frequency analysis approach [Internet]. IEEE Transactions on Computational Intelligence and AI in Games. 2015 ; 7( 3): 255-265.[citado 2024 mar. 29 ] Available from: https://doi.org/10.1109/TCIAIG.2015.2401979

Digital Library of Intellectual Production of Universidade de São Paulo     2012 - 2024