Filtros : "EESC" "COELHO, REGINALDO TEIXEIRA" Removido: "Ingeniare : revista chilena de ingeniería" Limpar

Filtros



Refine with date range


  • Unidade: EESC

    Subjects: TRIBOLOGIA, USINAGEM, FERRAMENTAS, CORTE, ATRITO

    Versão PublicadaAcesso à fonteHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      COELHO, Reginaldo Teixeira e ARAI, Ricardo e ASSIS, Cleiton Lazaro Fazolo de. Método de determinação dos efeitos do atrito na interface cavaco-ferramenta. . Rio de Janeiro: Instituto Nacional da Propriedade Industrial. Disponível em: https://repositorio.usp.br/item/003082714. Acesso em: 28 mar. 2024. , 2021
    • APA

      Coelho, R. T., Arai, R., & Assis, C. L. F. de. (2021). Método de determinação dos efeitos do atrito na interface cavaco-ferramenta. Rio de Janeiro: Instituto Nacional da Propriedade Industrial. Recuperado de https://repositorio.usp.br/item/003082714
    • NLM

      Coelho RT, Arai R, Assis CLF de. Método de determinação dos efeitos do atrito na interface cavaco-ferramenta [Internet]. 2021 ;[citado 2024 mar. 28 ] Available from: https://repositorio.usp.br/item/003082714
    • Vancouver

      Coelho RT, Arai R, Assis CLF de. Método de determinação dos efeitos do atrito na interface cavaco-ferramenta [Internet]. 2021 ;[citado 2024 mar. 28 ] Available from: https://repositorio.usp.br/item/003082714
  • Source: International Journal of Engineering Materials and Manufacture. Unidade: EESC

    Subjects: USINAGEM, TITÂNIO, DESGASTE, ENGENHARIA DE PRODUÇÃO

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      BARRAGAN DE LOS RIOS, German Alberto e MARIANI, Fábio Edson e COELHO, Reginaldo Teixeira. Ti6Al4V thin walls production using laser directed energy deposition (LDED) process. International Journal of Engineering Materials and Manufacture, v. 6, n. 3, p. 124-131, 2021Tradução . . Disponível em: https://doi.org/10.26776/ijemm.06.03.2021.03. Acesso em: 28 mar. 2024.
    • APA

      Barragan De Los Rios, G. A., Mariani, F. E., & Coelho, R. T. (2021). Ti6Al4V thin walls production using laser directed energy deposition (LDED) process. International Journal of Engineering Materials and Manufacture, 6( 3), 124-131. doi:10.26776/ijemm.06.03.2021.03
    • NLM

      Barragan De Los Rios GA, Mariani FE, Coelho RT. Ti6Al4V thin walls production using laser directed energy deposition (LDED) process [Internet]. International Journal of Engineering Materials and Manufacture. 2021 ; 6( 3): 124-131.[citado 2024 mar. 28 ] Available from: https://doi.org/10.26776/ijemm.06.03.2021.03
    • Vancouver

      Barragan De Los Rios GA, Mariani FE, Coelho RT. Ti6Al4V thin walls production using laser directed energy deposition (LDED) process [Internet]. International Journal of Engineering Materials and Manufacture. 2021 ; 6( 3): 124-131.[citado 2024 mar. 28 ] Available from: https://doi.org/10.26776/ijemm.06.03.2021.03
  • Source: Manufacturing Letters. Unidade: EESC

    Subjects: ALGORITMOS, MANUFATURA ADITIVA, ENGENHARIA DE PRODUÇÃO

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      DÁVILA, Jose Luis et al. Algorithms-aided design applied to the tool-paths generation for hybrid manufacturing. Manufacturing Letters. Amsterdam, Netherlands: Elsevier BV. Disponível em: https://doi.org/10.1016/j.mfglet.2020.12.003. Acesso em: 28 mar. 2024. , 2021
    • APA

      Dávila, J. L., Inforçatti Neto, P., Noritomi, P. Y., Coelho, R. T., & Silva, J. V. L. da. (2021). Algorithms-aided design applied to the tool-paths generation for hybrid manufacturing. Manufacturing Letters. Amsterdam, Netherlands: Elsevier BV. doi:10.1016/j.mfglet.2020.12.003
    • NLM

      Dávila JL, Inforçatti Neto P, Noritomi PY, Coelho RT, Silva JVL da. Algorithms-aided design applied to the tool-paths generation for hybrid manufacturing [Internet]. Manufacturing Letters. 2021 ; 27 53-57.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1016/j.mfglet.2020.12.003
    • Vancouver

      Dávila JL, Inforçatti Neto P, Noritomi PY, Coelho RT, Silva JVL da. Algorithms-aided design applied to the tool-paths generation for hybrid manufacturing [Internet]. Manufacturing Letters. 2021 ; 27 53-57.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1016/j.mfglet.2020.12.003
  • Source: Procedia Manufacturing. Conference titles: SME North American Manufacturing Research Conference - NAMRC. Unidades: EESC, ICMC

    Subjects: MANUFATURA, DESENVOLVIMENTO DE SOFTWARE, BENCHMARKS

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      RIBEIRO, Kandice Suane Barros et al. A novel melt pool mapping technique towards the online monitoring of directed energy deposition operations. Procedia Manufacturing. Amsterdam: Escola de Engenharia de São Carlos, Universidade de São Paulo. Disponível em: https://doi.org/10.1016/j.promfg.2021.06.058. Acesso em: 28 mar. 2024. , 2021
    • APA

      Ribeiro, K. S. B., Nuñez, H. H. L., Jones, J. B., Coates, P., & Coelho, R. T. (2021). A novel melt pool mapping technique towards the online monitoring of directed energy deposition operations. Procedia Manufacturing. Amsterdam: Escola de Engenharia de São Carlos, Universidade de São Paulo. doi:10.1016/j.promfg.2021.06.058
    • NLM

      Ribeiro KSB, Nuñez HHL, Jones JB, Coates P, Coelho RT. A novel melt pool mapping technique towards the online monitoring of directed energy deposition operations [Internet]. Procedia Manufacturing. 2021 ; 53 576-584.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1016/j.promfg.2021.06.058
    • Vancouver

      Ribeiro KSB, Nuñez HHL, Jones JB, Coates P, Coelho RT. A novel melt pool mapping technique towards the online monitoring of directed energy deposition operations [Internet]. Procedia Manufacturing. 2021 ; 53 576-584.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1016/j.promfg.2021.06.058
  • Conference titles: Congresso Brasileiro de Engenharia de Fabricação - COBEF. Unidade: EESC

    Subjects: ENGENHARIA DE PRODUÇÃO, MANUFATURA, USINAGEM

    Versão PublicadaHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      ALMEIDA, Julia Fornaziero de et al. Comparação e ordenação de preferência entre os processos de manufatura aditiva (MA) e usinagem convencional para a fabricação de peças aeronáuticas usando método fuzzy topsis. 2021, Anais.. Rio de Janeiro, RJ: ABCM, 2021. Disponível em: https://repositorio.usp.br/directbitstream/18d57d3a-1629-4a85-a1ae-e11a19561268/Compara%C3%A7%C3%A3o%20e%20Ordena%C3%A7%C3%A3o%20de%20Prefer%C3%AAncia%20entre%20os%20Processos%20de%20Manufatura%20Aditiva%20%28MA%29%20e%20Usinagem%20Convencional%20para%20a%20Fabrica%C3%A7%C3%A3o%20de%20Pe%C3%A7as%20Aeron%C3%A1uticas%20usando%20m%C3%A9todo%20Fuzzy%20TOPSIS.pdf. Acesso em: 28 mar. 2024.
    • APA

      Almeida, J. F. de, Barragan De Los Rios, G. A., Carpinetti, L. C. R., & Coelho, R. T. (2021). Comparação e ordenação de preferência entre os processos de manufatura aditiva (MA) e usinagem convencional para a fabricação de peças aeronáuticas usando método fuzzy topsis. In . Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/18d57d3a-1629-4a85-a1ae-e11a19561268/Compara%C3%A7%C3%A3o%20e%20Ordena%C3%A7%C3%A3o%20de%20Prefer%C3%AAncia%20entre%20os%20Processos%20de%20Manufatura%20Aditiva%20%28MA%29%20e%20Usinagem%20Convencional%20para%20a%20Fabrica%C3%A7%C3%A3o%20de%20Pe%C3%A7as%20Aeron%C3%A1uticas%20usando%20m%C3%A9todo%20Fuzzy%20TOPSIS.pdf
    • NLM

      Almeida JF de, Barragan De Los Rios GA, Carpinetti LCR, Coelho RT. Comparação e ordenação de preferência entre os processos de manufatura aditiva (MA) e usinagem convencional para a fabricação de peças aeronáuticas usando método fuzzy topsis [Internet]. 2021 ;[citado 2024 mar. 28 ] Available from: https://repositorio.usp.br/directbitstream/18d57d3a-1629-4a85-a1ae-e11a19561268/Compara%C3%A7%C3%A3o%20e%20Ordena%C3%A7%C3%A3o%20de%20Prefer%C3%AAncia%20entre%20os%20Processos%20de%20Manufatura%20Aditiva%20%28MA%29%20e%20Usinagem%20Convencional%20para%20a%20Fabrica%C3%A7%C3%A3o%20de%20Pe%C3%A7as%20Aeron%C3%A1uticas%20usando%20m%C3%A9todo%20Fuzzy%20TOPSIS.pdf
    • Vancouver

      Almeida JF de, Barragan De Los Rios GA, Carpinetti LCR, Coelho RT. Comparação e ordenação de preferência entre os processos de manufatura aditiva (MA) e usinagem convencional para a fabricação de peças aeronáuticas usando método fuzzy topsis [Internet]. 2021 ;[citado 2024 mar. 28 ] Available from: https://repositorio.usp.br/directbitstream/18d57d3a-1629-4a85-a1ae-e11a19561268/Compara%C3%A7%C3%A3o%20e%20Ordena%C3%A7%C3%A3o%20de%20Prefer%C3%AAncia%20entre%20os%20Processos%20de%20Manufatura%20Aditiva%20%28MA%29%20e%20Usinagem%20Convencional%20para%20a%20Fabrica%C3%A7%C3%A3o%20de%20Pe%C3%A7as%20Aeron%C3%A1uticas%20usando%20m%C3%A9todo%20Fuzzy%20TOPSIS.pdf
  • Source: Journal of Materials Engineering and Performance. Unidade: EESC

    Subjects: MANUFATURA, LASER

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      BARRAGAN DE LOS RIOS, German Alberto et al. Characterization and optimization of process parameters for directed energy deposition powder-fed laser system. Journal of Materials Engineering and Performance, p. 1-10, 2021Tradução . . Disponível em: https://doi.org/10.1007/s11665-021-05762-9. Acesso em: 28 mar. 2024.
    • APA

      Barragan De Los Rios, G. A., Rojas Perilla, D. A., Grass Nuñez, J., Mariani, F. E., & Coelho, R. T. (2021). Characterization and optimization of process parameters for directed energy deposition powder-fed laser system. Journal of Materials Engineering and Performance, 1-10. doi:10.1007/s11665-021-05762-9
    • NLM

      Barragan De Los Rios GA, Rojas Perilla DA, Grass Nuñez J, Mariani FE, Coelho RT. Characterization and optimization of process parameters for directed energy deposition powder-fed laser system [Internet]. Journal of Materials Engineering and Performance. 2021 ; 1-10.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1007/s11665-021-05762-9
    • Vancouver

      Barragan De Los Rios GA, Rojas Perilla DA, Grass Nuñez J, Mariani FE, Coelho RT. Characterization and optimization of process parameters for directed energy deposition powder-fed laser system [Internet]. Journal of Materials Engineering and Performance. 2021 ; 1-10.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1007/s11665-021-05762-9
  • Source: Journal of Materials Engineering and Performance. Unidade: EESC

    Subjects: AÇO INOXIDÁVEL, MANUFATURA, SUPERFÍCIES, ENGENHARIA DE PRODUÇÃO

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      MARIANI, Fábio Edson et al. Effect of laser polishing post-processing technique on the roughness and wear resistance of inconel 625 deposited by laser cladding on AISI 304L stainless steel. Journal of Materials Engineering and Performance, p. 1-9, 2021Tradução . . Disponível em: https://doi.org/10.1007/s11665-021-05962-3. Acesso em: 28 mar. 2024.
    • APA

      Mariani, F. E., Ribeiro, K. S. B., Lombardi Neto, A., Casteletti, L. C., & Coelho, R. T. (2021). Effect of laser polishing post-processing technique on the roughness and wear resistance of inconel 625 deposited by laser cladding on AISI 304L stainless steel. Journal of Materials Engineering and Performance, 1-9. doi:10.1007/s11665-021-05962-3
    • NLM

      Mariani FE, Ribeiro KSB, Lombardi Neto A, Casteletti LC, Coelho RT. Effect of laser polishing post-processing technique on the roughness and wear resistance of inconel 625 deposited by laser cladding on AISI 304L stainless steel [Internet]. Journal of Materials Engineering and Performance. 2021 ; 1-9.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1007/s11665-021-05962-3
    • Vancouver

      Mariani FE, Ribeiro KSB, Lombardi Neto A, Casteletti LC, Coelho RT. Effect of laser polishing post-processing technique on the roughness and wear resistance of inconel 625 deposited by laser cladding on AISI 304L stainless steel [Internet]. Journal of Materials Engineering and Performance. 2021 ; 1-9.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1007/s11665-021-05962-3
  • Source: Journal of Materials Research and Technology. Unidade: EESC

    Subjects: TENACIDADE DOS MATERIAIS, MANUFATURA, TERCEIRA DIMENSÃO, ENGENHARIA DE PRODUÇÃO

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      OLIVEIRA, Adriel P. et al. Effect of microstructure and defect formation on the bending properties of additive manufactured H13 tool steel. Journal of Materials Research and Technology, v. 15, p. 3598-3506, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2021.10.011. Acesso em: 28 mar. 2024.
    • APA

      Oliveira, A. P., Lima, L. H. Q. R., Felipe, B. C. A., Bolfarini, C., Coelho, R. T., & Gargarella, P. (2021). Effect of microstructure and defect formation on the bending properties of additive manufactured H13 tool steel. Journal of Materials Research and Technology, 15, 3598-3506. doi:10.1016/j.jmrt.2021.10.011
    • NLM

      Oliveira AP, Lima LHQR, Felipe BCA, Bolfarini C, Coelho RT, Gargarella P. Effect of microstructure and defect formation on the bending properties of additive manufactured H13 tool steel [Internet]. Journal of Materials Research and Technology. 2021 ; 15 3598-3506.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1016/j.jmrt.2021.10.011
    • Vancouver

      Oliveira AP, Lima LHQR, Felipe BCA, Bolfarini C, Coelho RT, Gargarella P. Effect of microstructure and defect formation on the bending properties of additive manufactured H13 tool steel [Internet]. Journal of Materials Research and Technology. 2021 ; 15 3598-3506.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1016/j.jmrt.2021.10.011
  • Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC

    Subjects: INDÚSTRIA 4.0, MANUFATURA, ENGENHARIA DE PRODUÇÃO

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      D'ÁVILA, José Luiz et al. Hybrid manufacturing: a review of the synergy between directed energy deposition and subtractive processes. International Journal of Advanced Manufacturing Technology, v. 110, p. 3377-3390, 2020Tradução . . Disponível em: https://doi.org/10.1007/s00170-020-06062-7. Acesso em: 28 mar. 2024.
    • APA

      D'Ávila, J. L., Inforçatti Neto, P., Noritomi, P. Y., Coelho, R. T., & Silva, J. V. L. da. (2020). Hybrid manufacturing: a review of the synergy between directed energy deposition and subtractive processes. International Journal of Advanced Manufacturing Technology, 110, 3377-3390. doi:10.1007/s00170-020-06062-7
    • NLM

      D'Ávila JL, Inforçatti Neto P, Noritomi PY, Coelho RT, Silva JVL da. Hybrid manufacturing: a review of the synergy between directed energy deposition and subtractive processes [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ; 110 3377-3390.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1007/s00170-020-06062-7
    • Vancouver

      D'Ávila JL, Inforçatti Neto P, Noritomi PY, Coelho RT, Silva JVL da. Hybrid manufacturing: a review of the synergy between directed energy deposition and subtractive processes [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ; 110 3377-3390.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1007/s00170-020-06062-7
  • Source: Soldagem & Inspeção. Unidade: EESC

    Subjects: AÇO INOXIDÁVEL, LASER, MANUFATURA, ENGENHARIA DE PRODUÇÃO

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      MONTUOURI, Riccardo Augusto Moreira et al. Manufatura aditiva de aço inoxidável 316L por fusão seletiva a laser. Soldagem & Inspeção, v. 25, p. Se 2020, 2020Tradução . . Disponível em: https://doi.org/10.1590/0104-9224/SI25.30. Acesso em: 28 mar. 2024.
    • APA

      Montuouri, R. A. M., Figueira, G., Cataldi, T. P., Alcântara, N. G. de, Bolfarini, C., Coelho, R. T., & Gargarella, P. (2020). Manufatura aditiva de aço inoxidável 316L por fusão seletiva a laser. Soldagem & Inspeção, 25, Se 2020. doi:10.1590/0104-9224/SI25.30
    • NLM

      Montuouri RAM, Figueira G, Cataldi TP, Alcântara NG de, Bolfarini C, Coelho RT, Gargarella P. Manufatura aditiva de aço inoxidável 316L por fusão seletiva a laser [Internet]. Soldagem & Inspeção. 2020 ; 25 Se 2020.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1590/0104-9224/SI25.30
    • Vancouver

      Montuouri RAM, Figueira G, Cataldi TP, Alcântara NG de, Bolfarini C, Coelho RT, Gargarella P. Manufatura aditiva de aço inoxidável 316L por fusão seletiva a laser [Internet]. Soldagem & Inspeção. 2020 ; 25 Se 2020.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1590/0104-9224/SI25.30
  • Source: Revista Matéria. Unidade: EESC

    Subjects: MANUFATURA, IMAGEM 3D, IMPRESSÃO, CERÂMICA, ENGENHARIA MECÂNICA

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      CAMARGO, Italo Leite de et al. An overview of laser engineered net shaping of ceramics. Revista Matéria, v. 25, n. 1, p. [1-11], 2020Tradução . . Disponível em: https://doi.org/10.1590/S1517-707620200001.0916. Acesso em: 28 mar. 2024.
    • APA

      Camargo, I. L. de, Lovo, J. F. P., Erbereli, R., Coelho, R. T., Silva, I. B. da, & Fortulan, C. A. (2020). An overview of laser engineered net shaping of ceramics. Revista Matéria, 25( 1), [1-11]. doi:10.1590/S1517-707620200001.0916
    • NLM

      Camargo IL de, Lovo JFP, Erbereli R, Coelho RT, Silva IB da, Fortulan CA. An overview of laser engineered net shaping of ceramics [Internet]. Revista Matéria. 2020 ; 25( 1): [1-11].[citado 2024 mar. 28 ] Available from: https://doi.org/10.1590/S1517-707620200001.0916
    • Vancouver

      Camargo IL de, Lovo JFP, Erbereli R, Coelho RT, Silva IB da, Fortulan CA. An overview of laser engineered net shaping of ceramics [Internet]. Revista Matéria. 2020 ; 25( 1): [1-11].[citado 2024 mar. 28 ] Available from: https://doi.org/10.1590/S1517-707620200001.0916
  • Source: Procedia Manufacturing. Conference titles: North American Manufacturing Research Conference - NAMRC 48. Unidade: EESC

    Assunto: ENGENHARIA DE PRODUÇÃO

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      RIBEIRO, Kandice Suane Barros e MARIANI, Fábio Edson e COELHO, Reginaldo Teixeira. A study of different deposition strategies in direct energy deposition (DED) processes. Procedia Manufacturing. Amsterdam, Netherlands: Elsevier. Disponível em: https://doi.org/10.1016/j.promfg.2020.05.158. Acesso em: 28 mar. 2024. , 2020
    • APA

      Ribeiro, K. S. B., Mariani, F. E., & Coelho, R. T. (2020). A study of different deposition strategies in direct energy deposition (DED) processes. Procedia Manufacturing. Amsterdam, Netherlands: Elsevier. doi:10.1016/j.promfg.2020.05.158
    • NLM

      Ribeiro KSB, Mariani FE, Coelho RT. A study of different deposition strategies in direct energy deposition (DED) processes [Internet]. Procedia Manufacturing. 2020 ; 48 663-670.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1016/j.promfg.2020.05.158
    • Vancouver

      Ribeiro KSB, Mariani FE, Coelho RT. A study of different deposition strategies in direct energy deposition (DED) processes [Internet]. Procedia Manufacturing. 2020 ; 48 663-670.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1016/j.promfg.2020.05.158
  • Source: Procedia Manufacturing. Conference titles: North American Manufacturing Research Conference - NAMRC. Unidade: EESC

    Subjects: USINAGEM, MANUFATURA, SOLDAGEM, ENGENHARIA DE PRODUÇÃO

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      MOREIRA, Alcindo Fernando et al. An initial investigation of tungsten inert gas (TIG) torch as heat source for additive manufacturing (AM) process. Procedia Manufacturing. Amsterdam, Netherlands: Elsevier. Disponível em: https://doi.org/10.1016/j.promfg.2020.05.159. Acesso em: 28 mar. 2024. , 2020
    • APA

      Moreira, A. F., Ribeiro, K. S. B., Mariani, F. E., & Coelho, R. T. (2020). An initial investigation of tungsten inert gas (TIG) torch as heat source for additive manufacturing (AM) process. Procedia Manufacturing. Amsterdam, Netherlands: Elsevier. doi:10.1016/j.promfg.2020.05.159
    • NLM

      Moreira AF, Ribeiro KSB, Mariani FE, Coelho RT. An initial investigation of tungsten inert gas (TIG) torch as heat source for additive manufacturing (AM) process [Internet]. Procedia Manufacturing. 2020 ; 48 671-677.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1016/j.promfg.2020.05.159
    • Vancouver

      Moreira AF, Ribeiro KSB, Mariani FE, Coelho RT. An initial investigation of tungsten inert gas (TIG) torch as heat source for additive manufacturing (AM) process [Internet]. Procedia Manufacturing. 2020 ; 48 671-677.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1016/j.promfg.2020.05.159
  • Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC

    Assunto: ENGENHARIA DE PRODUÇÃO

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      ASSIS, Cleiton Lazaro Fazolo de e MECELIS, Guilherme Rosati e COELHO, Reginaldo Teixeira. An investigation of stainless steel 316L parts produced by powder bed fusion submitted to micro-endmilling operations. International Journal of Advanced Manufacturing Technology, v. 109, p. 1867-1880, 2020Tradução . . Disponível em: https://doi.org/10.1007/s00170-020-05710-2. Acesso em: 28 mar. 2024.
    • APA

      Assis, C. L. F. de, Mecelis, G. R., & Coelho, R. T. (2020). An investigation of stainless steel 316L parts produced by powder bed fusion submitted to micro-endmilling operations. International Journal of Advanced Manufacturing Technology, 109, 1867-1880. doi:10.1007/s00170-020-05710-2
    • NLM

      Assis CLF de, Mecelis GR, Coelho RT. An investigation of stainless steel 316L parts produced by powder bed fusion submitted to micro-endmilling operations [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ; 109 1867-1880.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1007/s00170-020-05710-2
    • Vancouver

      Assis CLF de, Mecelis GR, Coelho RT. An investigation of stainless steel 316L parts produced by powder bed fusion submitted to micro-endmilling operations [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ; 109 1867-1880.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1007/s00170-020-05710-2
  • Source: Anais. Conference titles: Simpósio do Programa de Pós-Graduação em Engenharia Mecânica - SIPGEM. Unidade: EESC

    Subjects: MANUFATURA, IMAGEM 3D, ENGENHARIA MECÂNICA

    Acesso à fonteHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      GRASS NUNEZ, Johan Sebastian et al. Simulação do fluxo de gás em um bocal coaxial para máquina de manufatura híbrida. 2019, Anais.. São Carlos, SP: EESC-USP, 2019. Disponível em: http://soac.eesc.usp.br/index.php/SiPGEM/ivsipgem/paper/view/1892/998. Acesso em: 28 mar. 2024.
    • APA

      Grass Nunez, J. S., Rojas Perilla, D. A., Barragan De Los Rios, G. A., & Coelho, R. T. (2019). Simulação do fluxo de gás em um bocal coaxial para máquina de manufatura híbrida. In Anais. São Carlos, SP: EESC-USP. Recuperado de http://soac.eesc.usp.br/index.php/SiPGEM/ivsipgem/paper/view/1892/998
    • NLM

      Grass Nunez JS, Rojas Perilla DA, Barragan De Los Rios GA, Coelho RT. Simulação do fluxo de gás em um bocal coaxial para máquina de manufatura híbrida [Internet]. Anais. 2019 ;[citado 2024 mar. 28 ] Available from: http://soac.eesc.usp.br/index.php/SiPGEM/ivsipgem/paper/view/1892/998
    • Vancouver

      Grass Nunez JS, Rojas Perilla DA, Barragan De Los Rios GA, Coelho RT. Simulação do fluxo de gás em um bocal coaxial para máquina de manufatura híbrida [Internet]. Anais. 2019 ;[citado 2024 mar. 28 ] Available from: http://soac.eesc.usp.br/index.php/SiPGEM/ivsipgem/paper/view/1892/998
  • Source: Anais. Conference titles: Simpósio do Programa de Pós-Graduação em Engenharia Mecânica - SIPGEM. Unidade: EESC

    Subjects: MANUFATURA, TERCEIRA DIMENSÃO, DESENVOLVIMENTO DE PRODUTOS, ENGENHARIA MECÂNICA

    Acesso à fonteHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      ROJAS PERILLA, Daniel Andres et al. Proposta de modelo analítico e verificação paramétrica na formação do perfil transversal em manufatura aditiva por via DED (Direct Energy Deposition). 2019, Anais.. São Carlos, SP: EESC-USP, 2019. Disponível em: http://soac.eesc.usp.br/index.php/SiPGEM/ivsipgem/paper/view/1887/1012. Acesso em: 28 mar. 2024.
    • APA

      Rojas Perilla, D. A., Grass Nuñez, J. S., Barragan De Los Rios, G. A., & Coelho, R. T. (2019). Proposta de modelo analítico e verificação paramétrica na formação do perfil transversal em manufatura aditiva por via DED (Direct Energy Deposition). In Anais. São Carlos, SP: EESC-USP. Recuperado de http://soac.eesc.usp.br/index.php/SiPGEM/ivsipgem/paper/view/1887/1012
    • NLM

      Rojas Perilla DA, Grass Nuñez JS, Barragan De Los Rios GA, Coelho RT. Proposta de modelo analítico e verificação paramétrica na formação do perfil transversal em manufatura aditiva por via DED (Direct Energy Deposition) [Internet]. Anais. 2019 ;[citado 2024 mar. 28 ] Available from: http://soac.eesc.usp.br/index.php/SiPGEM/ivsipgem/paper/view/1887/1012
    • Vancouver

      Rojas Perilla DA, Grass Nuñez JS, Barragan De Los Rios GA, Coelho RT. Proposta de modelo analítico e verificação paramétrica na formação do perfil transversal em manufatura aditiva por via DED (Direct Energy Deposition) [Internet]. Anais. 2019 ;[citado 2024 mar. 28 ] Available from: http://soac.eesc.usp.br/index.php/SiPGEM/ivsipgem/paper/view/1887/1012
  • Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC

    Subjects: RETIFICAÇÃO, ENGENHARIA DE PRODUÇÃO

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      SILVA, Sandro Pereira da et al. Finding dimensional stability considering deflection effects in cylindrical plunge grinding. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 41, p. 1-10, 2019Tradução . . Disponível em: https://doi.org/10.1007/s40430-019-2056-5. Acesso em: 28 mar. 2024.
    • APA

      Silva, S. P. da, Silva, E. J. da, Coelho, R. T., & Rossi, M. A. (2019). Finding dimensional stability considering deflection effects in cylindrical plunge grinding. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41, 1-10. doi:10.1007/s40430-019-2056-5
    • NLM

      Silva SP da, Silva EJ da, Coelho RT, Rossi MA. Finding dimensional stability considering deflection effects in cylindrical plunge grinding [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2019 ; 41 1-10.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1007/s40430-019-2056-5
    • Vancouver

      Silva SP da, Silva EJ da, Coelho RT, Rossi MA. Finding dimensional stability considering deflection effects in cylindrical plunge grinding [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2019 ; 41 1-10.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1007/s40430-019-2056-5
  • Source: Anais. Conference titles: Congresso Brasileiro de Engenharia de Fabricação - COBEF. Unidade: EESC

    Subjects: USINAGEM, MANUFATURA ADITIVA, ENGENHARIA MECÂNICA

    Versão PublicadaHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      ASSIS, Cleiton Lazaro Fazolo de e COELHO, Reginaldo Teixeira. Estudo da formação de rebarbas no microfrisamento de preças produzidas por manufatura aditiva. 2019, Anais.. Rio de Janeiro, RJ: ABCM, 2019. Disponível em: https://repositorio.usp.br/directbitstream/523bd3aa-632b-4918-a4b8-7040ef278907/art03.pdf. Acesso em: 28 mar. 2024.
    • APA

      Assis, C. L. F. de, & Coelho, R. T. (2019). Estudo da formação de rebarbas no microfrisamento de preças produzidas por manufatura aditiva. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/523bd3aa-632b-4918-a4b8-7040ef278907/art03.pdf
    • NLM

      Assis CLF de, Coelho RT. Estudo da formação de rebarbas no microfrisamento de preças produzidas por manufatura aditiva [Internet]. Anais. 2019 ;[citado 2024 mar. 28 ] Available from: https://repositorio.usp.br/directbitstream/523bd3aa-632b-4918-a4b8-7040ef278907/art03.pdf
    • Vancouver

      Assis CLF de, Coelho RT. Estudo da formação de rebarbas no microfrisamento de preças produzidas por manufatura aditiva [Internet]. Anais. 2019 ;[citado 2024 mar. 28 ] Available from: https://repositorio.usp.br/directbitstream/523bd3aa-632b-4918-a4b8-7040ef278907/art03.pdf
  • Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC

    Subjects: MÁQUINAS-FERRAMENTA, SUSTENTABILIDADE, CONSUMO DE ENERGIA ELÉTRICA, EFICIÊNCIA ENERGÉTICA, ENGENHARIA DE PRODUÇÃO

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      PELEGRINO, Danilo Henrique e SANTOS, Raphael Galdino dos e COELHO, Reginaldo Teixeira. Experimental evaluation of energy consumption in machine tools: a case study for a two‑spindle turning center. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 41, p. 1-14, 2019Tradução . . Disponível em: https://doi.org/10.1007/s40430-019-1921-6. Acesso em: 28 mar. 2024.
    • APA

      Pelegrino, D. H., Santos, R. G. dos, & Coelho, R. T. (2019). Experimental evaluation of energy consumption in machine tools: a case study for a two‑spindle turning center. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41, 1-14. doi:10.1007/s40430-019-1921-6
    • NLM

      Pelegrino DH, Santos RG dos, Coelho RT. Experimental evaluation of energy consumption in machine tools: a case study for a two‑spindle turning center [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2019 ; 41 1-14.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1007/s40430-019-1921-6
    • Vancouver

      Pelegrino DH, Santos RG dos, Coelho RT. Experimental evaluation of energy consumption in machine tools: a case study for a two‑spindle turning center [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2019 ; 41 1-14.[citado 2024 mar. 28 ] Available from: https://doi.org/10.1007/s40430-019-1921-6
  • Source: Proceedings. Conference titles: International Conference & Exhibition. Unidade: EESC

    Subjects: MANUFATURA ADITIVA, RUGOSIDADE SUPERFICIAL, ENGENHARIA DE PRODUÇÃO

    PrivadoHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      COELHO, Reginaldo Teixeira e AZEVEDO, Rayssa e ASSIS, Cleiton. An investigation of anisotropy on AISI 316L obtained by additive manufacturing (AM) measuring surface roughness after micro-endmilling operations. 2018, Anais.. Cranfield, United Kingdom: EUSPEN, 2018. Disponível em: https://repositorio.usp.br/directbitstream/a96353fa-2405-468a-8c79-d4413c27ea7b/art05.pdf. Acesso em: 28 mar. 2024.
    • APA

      Coelho, R. T., Azevedo, R., & Assis, C. (2018). An investigation of anisotropy on AISI 316L obtained by additive manufacturing (AM) measuring surface roughness after micro-endmilling operations. In Proceedings. Cranfield, United Kingdom: EUSPEN. Recuperado de https://repositorio.usp.br/directbitstream/a96353fa-2405-468a-8c79-d4413c27ea7b/art05.pdf
    • NLM

      Coelho RT, Azevedo R, Assis C. An investigation of anisotropy on AISI 316L obtained by additive manufacturing (AM) measuring surface roughness after micro-endmilling operations [Internet]. Proceedings. 2018 ;[citado 2024 mar. 28 ] Available from: https://repositorio.usp.br/directbitstream/a96353fa-2405-468a-8c79-d4413c27ea7b/art05.pdf
    • Vancouver

      Coelho RT, Azevedo R, Assis C. An investigation of anisotropy on AISI 316L obtained by additive manufacturing (AM) measuring surface roughness after micro-endmilling operations [Internet]. Proceedings. 2018 ;[citado 2024 mar. 28 ] Available from: https://repositorio.usp.br/directbitstream/a96353fa-2405-468a-8c79-d4413c27ea7b/art05.pdf

Digital Library of Intellectual Production of Universidade de São Paulo     2012 - 2024