ReP USP - Resultado da busca

Artigo de periodico
Synergism between tribological parameters-micro abrasive concentration level, "micro-abrasive concentration level", micro-abrasive particle type", and ",iquid type" of a micro-abrasive slurry compositition on the micro-abrasive wear behaviour of Fe-30Al-6Cr (at.%) iron aluminide alloys (2023)
Paula, Angel Felipe Magnossão; Borges, Doris Feijó Leão; Silva, Felipe Carneiro da ; Rossino, Luciana Sgarbi; Manfrinato, Marcos Dorigão ; Verma, Vikas; Luna-Domínguez, Jorge Humberto; Magnabosco, Rodrigo ; Schön, Cláudio Geraldo ; Cozza, Ronaldo Câmara
Source: Wear. Unidade: EP
Subjects: DESGASTE ABRASIVO, ABRASÃO, TRIBOLOGIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PAULA, Angel Felipe Magnossão et al. Synergism between tribological parameters-micro abrasive concentration level, "micro-abrasive concentration level", micro-abrasive particle type", and ",iquid type" of a micro-abrasive slurry compositition on the micro-abrasive wear behaviour of Fe-30Al-6Cr (at.%) iron aluminide alloys. Wear, v. 524-525, p. 16 , 2023Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2023.204867. Acesso em: 19 abr. 2024.
APA
Paula, A. F. M., Borges, D. F. L., Silva, F. C. da, Rossino, L. S., Manfrinato, M. D., Verma, V., et al. (2023). Synergism between tribological parameters-micro abrasive concentration level, "micro-abrasive concentration level", micro-abrasive particle type", and ",iquid type" of a micro-abrasive slurry compositition on the micro-abrasive wear behaviour of Fe-30Al-6Cr (at.%) iron aluminide alloys. Wear, 524-525, 16 . doi:10.1016/j.wear.2023.204867
NLM
Paula AFM, Borges DFL, Silva FC da, Rossino LS, Manfrinato MD, Verma V, Luna-Domínguez JH, Magnabosco R, Schön CG, Cozza RC. Synergism between tribological parameters-micro abrasive concentration level, "micro-abrasive concentration level", micro-abrasive particle type", and ",iquid type" of a micro-abrasive slurry compositition on the micro-abrasive wear behaviour of Fe-30Al-6Cr (at.%) iron aluminide alloys [Internet]. Wear. 2023 ; 524-525 16 .[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2023.204867
Vancouver
Paula AFM, Borges DFL, Silva FC da, Rossino LS, Manfrinato MD, Verma V, Luna-Domínguez JH, Magnabosco R, Schön CG, Cozza RC. Synergism between tribological parameters-micro abrasive concentration level, "micro-abrasive concentration level", micro-abrasive particle type", and ",iquid type" of a micro-abrasive slurry compositition on the micro-abrasive wear behaviour of Fe-30Al-6Cr (at.%) iron aluminide alloys [Internet]. Wear. 2023 ; 524-525 16 .[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2023.204867
Artigo de periodico
On the tribological behavior of cobalt-based nanocomposite coatings containing ZnO@Graphene oxide core-shell nanoparticles (2023)
Romero, Manuelle Corbani; Mello, Valdicleide; Boher, Christine; Tschiptschin, André Paulo ; Scandian, Cherlio
Source: Wear. Unidade: EP
Subjects: REVESTIMENTOS, COBALTO, NANOCOMPOSITOS, NANOPARTÍCULAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ROMERO, Manuelle Corbani et al. On the tribological behavior of cobalt-based nanocomposite coatings containing ZnO@Graphene oxide core-shell nanoparticles. Wear, v. 522, p. 8 , 2023Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2023.204835. Acesso em: 19 abr. 2024.
APA
Romero, M. C., Mello, V., Boher, C., Tschiptschin, A. P., & Scandian, C. (2023). On the tribological behavior of cobalt-based nanocomposite coatings containing ZnO@Graphene oxide core-shell nanoparticles. Wear, 522, 8 . doi:10.1016/j.wear.2023.204835
NLM
Romero MC, Mello V, Boher C, Tschiptschin AP, Scandian C. On the tribological behavior of cobalt-based nanocomposite coatings containing ZnO@Graphene oxide core-shell nanoparticles [Internet]. Wear. 2023 ; 522 8 .[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2023.204835
Vancouver
Romero MC, Mello V, Boher C, Tschiptschin AP, Scandian C. On the tribological behavior of cobalt-based nanocomposite coatings containing ZnO@Graphene oxide core-shell nanoparticles [Internet]. Wear. 2023 ; 522 8 .[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2023.204835
Artigo de periodico
Influence of the microstructure on the rolling contact fatigue of rail steel: Spheroidized pearlite and fully pearlitic microstructure analysis (2022)
Pereira, Henrique Boschetti ; Alves, Luiz Henrique Dias ; Rezende, Andrei Bavaresco ; Mei, Paulo Roberto ; Goldenstein, Hélio
Source: Wear. Unidade: EP
Subjects: FADIGA DOS MATERIAIS, FERROVIAS, AÇO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Henrique Boschetti et al. Influence of the microstructure on the rolling contact fatigue of rail steel: Spheroidized pearlite and fully pearlitic microstructure analysis. Wear, v. 498-499, n. Ju, p. 11 , 2022Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2022.204299. Acesso em: 19 abr. 2024.
APA
Pereira, H. B., Alves, L. H. D., Rezende, A. B., Mei, P. R., & Goldenstein, H. (2022). Influence of the microstructure on the rolling contact fatigue of rail steel: Spheroidized pearlite and fully pearlitic microstructure analysis. Wear, 498-499( Ju), 11 . doi:10.1016/j.wear.2022.204299
NLM
Pereira HB, Alves LHD, Rezende AB, Mei PR, Goldenstein H. Influence of the microstructure on the rolling contact fatigue of rail steel: Spheroidized pearlite and fully pearlitic microstructure analysis [Internet]. Wear. 2022 ; 498-499( Ju): 11 .[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2022.204299
Vancouver
Pereira HB, Alves LHD, Rezende AB, Mei PR, Goldenstein H. Influence of the microstructure on the rolling contact fatigue of rail steel: Spheroidized pearlite and fully pearlitic microstructure analysis [Internet]. Wear. 2022 ; 498-499( Ju): 11 .[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2022.204299
Artigo de periodico
Assessment of micro-abrasive wear tribological properties of H10 tool-steel under conditions of “constant normal force ⇒ variable pressure” and “constant pressure ⇒ variable normal force” (2021)
Macedo, Marcelo de Matos; Luna-Domínguez, Jorge Humberto; Verma, Vikas; Schön, Cláudio Geraldo ; Cozza, Ronaldo Câmara
Source: Wear. Unidade: EP
Subjects: AÇO FERRAMENTA, DESGASTE ABRASIVO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MACEDO, Marcelo de Matos et al. Assessment of micro-abrasive wear tribological properties of H10 tool-steel under conditions of “constant normal force ⇒ variable pressure” and “constant pressure ⇒ variable normal force”. Wear, v. 476, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2021.203664. Acesso em: 19 abr. 2024.
APA
Macedo, M. de M., Luna-Domínguez, J. H., Verma, V., Schön, C. G., & Cozza, R. C. (2021). Assessment of micro-abrasive wear tribological properties of H10 tool-steel under conditions of “constant normal force ⇒ variable pressure” and “constant pressure ⇒ variable normal force”. Wear, 476. doi:10.1016/j.wear.2021.203664
NLM
Macedo M de M, Luna-Domínguez JH, Verma V, Schön CG, Cozza RC. Assessment of micro-abrasive wear tribological properties of H10 tool-steel under conditions of “constant normal force ⇒ variable pressure” and “constant pressure ⇒ variable normal force” [Internet]. Wear. 2021 ; 476[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2021.203664
Vancouver
Macedo M de M, Luna-Domínguez JH, Verma V, Schön CG, Cozza RC. Assessment of micro-abrasive wear tribological properties of H10 tool-steel under conditions of “constant normal force ⇒ variable pressure” and “constant pressure ⇒ variable normal force” [Internet]. Wear. 2021 ; 476[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2021.203664
Artigo de periodico
Multiphase-flow-induced corrosion and cavitation-erosion damages of API 5L X80 and API 5DP grade S steels (2020)
Silva, Carlos Alberto da; Varela, Luis Bernardo; Kolawole, Funsho Olaitan ; Tschiptschin, André Paulo ; Panossian, Zehbour
Source: Wear. Unidade: EP
Subjects: CORROSÃO, AÇO CARBONO, EROSÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Carlos Alberto da et al. Multiphase-flow-induced corrosion and cavitation-erosion damages of API 5L X80 and API 5DP grade S steels. Wear, v. 452–453, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2020.203282. Acesso em: 19 abr. 2024.
APA
Silva, C. A. da, Varela, L. B., Kolawole, F. O., Tschiptschin, A. P., & Panossian, Z. (2020). Multiphase-flow-induced corrosion and cavitation-erosion damages of API 5L X80 and API 5DP grade S steels. Wear, 452–453. doi:10.1016/j.wear.2020.203282
NLM
Silva CA da, Varela LB, Kolawole FO, Tschiptschin AP, Panossian Z. Multiphase-flow-induced corrosion and cavitation-erosion damages of API 5L X80 and API 5DP grade S steels [Internet]. Wear. 2020 ;452–453[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2020.203282
Vancouver
Silva CA da, Varela LB, Kolawole FO, Tschiptschin AP, Panossian Z. Multiphase-flow-induced corrosion and cavitation-erosion damages of API 5L X80 and API 5DP grade S steels [Internet]. Wear. 2020 ;452–453[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2020.203282
Artigo de periodico
Hydraulic convey of iron ore slurry: pipeline wear and ore particle degradation in function of pumping time (2020)
Calderon-Hernández, José Wilmar ; Sinatora, Amilton ; Melo, Hercílio Gomes de ; Chaves, Arthur Pinto ; Mano, Eliana Satiko ; Leal Filho, Laurindo de Salles ; Paiva, José Luís de ; Braga, André Soares; Pinto, Thiago César de Souza
Source: Wear. Unidade: EP
Subjects: MINÉRIOS, EROSÃO, CORROSÃO, DESGASTE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CALDERON-HERNÁNDEZ, José Wilmar et al. Hydraulic convey of iron ore slurry: pipeline wear and ore particle degradation in function of pumping time. Wear, v. 450–451, p. 1-13, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2020.203272. Acesso em: 19 abr. 2024.
APA
Calderon-Hernández, J. W., Sinatora, A., Melo, H. G. de, Chaves, A. P., Mano, E. S., Leal Filho, L. de S., et al. (2020). Hydraulic convey of iron ore slurry: pipeline wear and ore particle degradation in function of pumping time. Wear, 450–451, 1-13. doi:10.1016/j.wear.2020.203272
NLM
Calderon-Hernández JW, Sinatora A, Melo HG de, Chaves AP, Mano ES, Leal Filho L de S, Paiva JL de, Braga AS, Pinto TC de S. Hydraulic convey of iron ore slurry: pipeline wear and ore particle degradation in function of pumping time [Internet]. Wear. 2020 ;450–451 1-13.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2020.203272
Vancouver
Calderon-Hernández JW, Sinatora A, Melo HG de, Chaves AP, Mano ES, Leal Filho L de S, Paiva JL de, Braga AS, Pinto TC de S. Hydraulic convey of iron ore slurry: pipeline wear and ore particle degradation in function of pumping time [Internet]. Wear. 2020 ;450–451 1-13.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2020.203272
Artigo de periodico
Improvement in the wear resistance of a hypereutectoid rail via heat treatment (2020)
Tressia, Gustavo; Sinatora, Amilton ; Goldenstein, Hélio ; Masoumi, Mohammad
Source: Wear. Unidade: EP
Subjects: DESGASTE, FADIGA DAS ESTRUTURAS, FERROVIAS, AÇO, TRILHOS, TRATAMENTO TÉRMICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TRESSIA, Gustavo et al. Improvement in the wear resistance of a hypereutectoid rail via heat treatment. Wear, v. 442–443, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2019.203122. Acesso em: 19 abr. 2024.
APA
Tressia, G., Sinatora, A., Goldenstein, H., & Masoumi, M. (2020). Improvement in the wear resistance of a hypereutectoid rail via heat treatment. Wear, 442–443. doi:10.1016/j.wear.2019.203122
NLM
Tressia G, Sinatora A, Goldenstein H, Masoumi M. Improvement in the wear resistance of a hypereutectoid rail via heat treatment [Internet]. Wear. 2020 ; 442–443[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2019.203122
Vancouver
Tressia G, Sinatora A, Goldenstein H, Masoumi M. Improvement in the wear resistance of a hypereutectoid rail via heat treatment [Internet]. Wear. 2020 ; 442–443[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2019.203122
Artigo de periodico
Assessment of tribological properties of plasma nitrided 410S ferritic-martensitic stainless steels (2019)
Umemura, Milena Tosti; Varela Jiménez, Luis Bernardo ; Pinedo, Carlos Eduardo ; Cozza, Ronaldo Câmara ; Tschiptschin, André Paulo
Source: Wear. Unidade: EP
Subjects: DESGASTE ABRASIVO, AÇO INOXIDÁVEL FERRÍTICO, AÇO INOXIDÁVEL MARTENSÍTICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
UMEMURA, Milena Tosti et al. Assessment of tribological properties of plasma nitrided 410S ferritic-martensitic stainless steels. Wear, v. 426–427, p. 49-58, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2018.12.092. Acesso em: 19 abr. 2024.
APA
Umemura, M. T., Varela Jiménez, L. B., Pinedo, C. E., Cozza, R. C., & Tschiptschin, A. P. (2019). Assessment of tribological properties of plasma nitrided 410S ferritic-martensitic stainless steels. Wear, 426–427, 49-58. doi:10.1016/j.wear.2018.12.092
NLM
Umemura MT, Varela Jiménez LB, Pinedo CE, Cozza RC, Tschiptschin AP. Assessment of tribological properties of plasma nitrided 410S ferritic-martensitic stainless steels [Internet]. Wear. 2019 ;426–427 49-58.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2018.12.092
Vancouver
Umemura MT, Varela Jiménez LB, Pinedo CE, Cozza RC, Tschiptschin AP. Assessment of tribological properties of plasma nitrided 410S ferritic-martensitic stainless steels [Internet]. Wear. 2019 ;426–427 49-58.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2018.12.092
Trabalho de evento-anais periodico
Cavitation erosion resistance of a non-standard cast cobalt alloy:Influence of solubilizing and cold working treatments (2019)
Romero, M C; Tschiptschin, André Paulo ; Scandian, Cherlio
Source: Wear. Conference titles: International Conference on Wear of Materials. Unidade: EP
Subjects: EROSÃO, CAVITAÇÃO, DESGASTE, FADIGA DAS ESTRUTURAS, COBALTO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ROMERO, M C e TSCHIPTSCHIN, André Paulo e SCANDIAN, Cherlio. Cavitation erosion resistance of a non-standard cast cobalt alloy:Influence of solubilizing and cold working treatments. Wear. Amsterdam: Escola Politécnica, Universidade de São Paulo. Disponível em: https://doi.org/10.1016/j.wear.2018.12.044. Acesso em: 19 abr. 2024. , 2019
APA
Romero, M. C., Tschiptschin, A. P., & Scandian, C. (2019). Cavitation erosion resistance of a non-standard cast cobalt alloy:Influence of solubilizing and cold working treatments. Wear. Amsterdam: Escola Politécnica, Universidade de São Paulo. doi:10.1016/j.wear.2018.12.044
NLM
Romero MC, Tschiptschin AP, Scandian C. Cavitation erosion resistance of a non-standard cast cobalt alloy:Influence of solubilizing and cold working treatments [Internet]. Wear. 2019 ; 426–427 518-526.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2018.12.044
Vancouver
Romero MC, Tschiptschin AP, Scandian C. Cavitation erosion resistance of a non-standard cast cobalt alloy:Influence of solubilizing and cold working treatments [Internet]. Wear. 2019 ; 426–427 518-526.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2018.12.044
Artigo de periodico
Study of sliding wear of the wheel flange - Rail gauge corner contact conditions: Comparative between cast and forged steel wheel materials (2019)
Almeida, Leandro Prates Ferreira de ; Falqueto, Leandro Entringer ; Goldenstein, Hélio ; Bozzi, Antonio Cesar ; Scandian, Cherlio
Source: Wear. Unidade: EP
Subjects: DESGASTE, ATRITO, FRICÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALMEIDA, Leandro Prates Ferreira de et al. Study of sliding wear of the wheel flange - Rail gauge corner contact conditions: Comparative between cast and forged steel wheel materials. Wear, v. 432-433, p. 1-10, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2019.05.009. Acesso em: 19 abr. 2024.
APA
Almeida, L. P. F. de, Falqueto, L. E., Goldenstein, H., Bozzi, A. C., & Scandian, C. (2019). Study of sliding wear of the wheel flange - Rail gauge corner contact conditions: Comparative between cast and forged steel wheel materials. Wear, 432-433, 1-10. doi:10.1016/j.wear.2019.05.009
NLM
Almeida LPF de, Falqueto LE, Goldenstein H, Bozzi AC, Scandian C. Study of sliding wear of the wheel flange - Rail gauge corner contact conditions: Comparative between cast and forged steel wheel materials [Internet]. Wear. 2019 ; 432-433 1-10.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2019.05.009
Vancouver
Almeida LPF de, Falqueto LE, Goldenstein H, Bozzi AC, Scandian C. Study of sliding wear of the wheel flange - Rail gauge corner contact conditions: Comparative between cast and forged steel wheel materials [Internet]. Wear. 2019 ; 432-433 1-10.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2019.05.009
Trabalho de evento-anais periodico
Low temperature plasma nitriding of a Co30Cr19Fe alloy for improving cavitation erosion resistance (2019)
Romero, M C; Tschiptschin, André Paulo ; Scandian, Cherlio
Source: Wear. Conference titles: International Conference on Wear of Materials. Unidade: EP
Subjects: COBALTO, EROSÃO, PLASMA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ROMERO, M C e TSCHIPTSCHIN, André Paulo e SCANDIAN, Cherlio. Low temperature plasma nitriding of a Co30Cr19Fe alloy for improving cavitation erosion resistance. Wear. Amsterdam: Escola Politécnica, Universidade de São Paulo. Disponível em: https://doi.org/10.1016/j.wear.2019.01.019. Acesso em: 19 abr. 2024. , 2019
APA
Romero, M. C., Tschiptschin, A. P., & Scandian, C. (2019). Low temperature plasma nitriding of a Co30Cr19Fe alloy for improving cavitation erosion resistance. Wear. Amsterdam: Escola Politécnica, Universidade de São Paulo. doi:10.1016/j.wear.2019.01.019
NLM
Romero MC, Tschiptschin AP, Scandian C. Low temperature plasma nitriding of a Co30Cr19Fe alloy for improving cavitation erosion resistance [Internet]. Wear. 2019 ; 426–427 581-588.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2019.01.019
Vancouver
Romero MC, Tschiptschin AP, Scandian C. Low temperature plasma nitriding of a Co30Cr19Fe alloy for improving cavitation erosion resistance [Internet]. Wear. 2019 ; 426–427 581-588.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2019.01.019
Artigo de periodico
Effects of ethanol content on cast iron cylinder wear in a flex-fuel internal combustion engine–A case study (2018)
Santos Filho, Diolino Jose dos ; Tschiptschin, André Paulo ; Goldenstein, Hélio
Source: Wear. Unidade: EP
Subjects: ETANOL, DESGASTE DOS MATERIAIS, FERRO FUNDIDO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS FILHO, Diolino Jose dos e TSCHIPTSCHIN, André Paulo e GOLDENSTEIN, Hélio. Effects of ethanol content on cast iron cylinder wear in a flex-fuel internal combustion engine–A case study. Wear, v. 406-407, p. 105-117, 2018Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2018.04.003. Acesso em: 19 abr. 2024.
APA
Santos Filho, D. J. dos, Tschiptschin, A. P., & Goldenstein, H. (2018). Effects of ethanol content on cast iron cylinder wear in a flex-fuel internal combustion engine–A case study. Wear, 406-407, 105-117. doi:10.1016/j.wear.2018.04.003
NLM
Santos Filho DJ dos, Tschiptschin AP, Goldenstein H. Effects of ethanol content on cast iron cylinder wear in a flex-fuel internal combustion engine–A case study [Internet]. Wear. 2018 ; 406-407 105-117.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2018.04.003
Vancouver
Santos Filho DJ dos, Tschiptschin AP, Goldenstein H. Effects of ethanol content on cast iron cylinder wear in a flex-fuel internal combustion engine–A case study [Internet]. Wear. 2018 ; 406-407 105-117.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2018.04.003
Artigo de periodico
The effect of in-service work hardening and crystallographic orientation on the micro-scratch wear of hadfield steel (2017)
Machado, P. C; Pereira, J I; Penagos, Jose Jimmy; Yonamine, Taeko; Sinatora, Amilton
Source: Wear. Unidade: EP
Subjects: DESGASTE ABRASIVO, RESISTÊNCIA DOS MATERIAIS, AÇO INOXIDÁVEL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MACHADO, P. C et al. The effect of in-service work hardening and crystallographic orientation on the micro-scratch wear of hadfield steel. Wear, v. 376–377, p. 1064-1073, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2016.12.057. Acesso em: 19 abr. 2024.
APA
Machado, P. C., Pereira, J. I., Penagos, J. J., Yonamine, T., & Sinatora, A. (2017). The effect of in-service work hardening and crystallographic orientation on the micro-scratch wear of hadfield steel. Wear, 376–377, 1064-1073. doi:10.1016/j.wear.2016.12.057
NLM
Machado PC, Pereira JI, Penagos JJ, Yonamine T, Sinatora A. The effect of in-service work hardening and crystallographic orientation on the micro-scratch wear of hadfield steel [Internet]. Wear. 2017 ; 376–377 1064-1073.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2016.12.057
Vancouver
Machado PC, Pereira JI, Penagos JJ, Yonamine T, Sinatora A. The effect of in-service work hardening and crystallographic orientation on the micro-scratch wear of hadfield steel [Internet]. Wear. 2017 ; 376–377 1064-1073.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2016.12.057
Artigo de periodico
Wear characterization from field and laboratory tests of pearlitic steels used for SAG mill liners (2017)
Pereira, J I; Machado, P. C; Penagos, Jose Jimmy; Sinatora, Amilton
Source: Wear. Unidade: EP
Subjects: DESGASTE ABRASIVO, RESISTÊNCIA DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, J I et al. Wear characterization from field and laboratory tests of pearlitic steels used for SAG mill liners. Wear, v. 376-377, p. 37-45, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2017.01.094. Acesso em: 19 abr. 2024.
APA
Pereira, J. I., Machado, P. C., Penagos, J. J., & Sinatora, A. (2017). Wear characterization from field and laboratory tests of pearlitic steels used for SAG mill liners. Wear, 376-377, 37-45. doi:10.1016/j.wear.2017.01.094
NLM
Pereira JI, Machado PC, Penagos JJ, Sinatora A. Wear characterization from field and laboratory tests of pearlitic steels used for SAG mill liners [Internet]. Wear. 2017 ; 376-377 37-45.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2017.01.094
Vancouver
Pereira JI, Machado PC, Penagos JJ, Sinatora A. Wear characterization from field and laboratory tests of pearlitic steels used for SAG mill liners [Internet]. Wear. 2017 ; 376-377 37-45.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2017.01.094
Artigo de periodico
Synergetic effect of niobium and molybdenum on abrasion resistance of high chromium cast irons (2017)
Penagos, Jose Jimmy; Pereira, J I; Machado, P. C; Albertin, Eduardo ; Sinatora, Amilton
Source: Wear. Unidade: EP
Subjects: DESGASTE ABRASIVO, NIÓBIO, AÇO FUNDIDO, RESISTÊNCIA DOS MATERIAIS, FERRO FUNDIDO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PENAGOS, Jose Jimmy et al. Synergetic effect of niobium and molybdenum on abrasion resistance of high chromium cast irons. Wear, v. 376–377, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2017.01.103. Acesso em: 19 abr. 2024.
APA
Penagos, J. J., Pereira, J. I., Machado, P. C., Albertin, E., & Sinatora, A. (2017). Synergetic effect of niobium and molybdenum on abrasion resistance of high chromium cast irons. Wear, 376–377. doi:10.1016/j.wear.2017.01.103
NLM
Penagos JJ, Pereira JI, Machado PC, Albertin E, Sinatora A. Synergetic effect of niobium and molybdenum on abrasion resistance of high chromium cast irons [Internet]. Wear. 2017 ; 376–377[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2017.01.103
Vancouver
Penagos JJ, Pereira JI, Machado PC, Albertin E, Sinatora A. Synergetic effect of niobium and molybdenum on abrasion resistance of high chromium cast irons [Internet]. Wear. 2017 ; 376–377[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2017.01.103
Artigo de periodico
Quantification of folded metal in cylinder bores through surface relocation (2017)
Obara, Rafael Brisolla ; Souza, Roberto Martins de ; Tomanik, E
Source: Wear. Unidade: EP
Subjects: DESGASTE DOS MATERIAIS, RESISTÊNCIA DOS MATERIAIS, DOBRADURA DE METAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OBARA, Rafael Brisolla e SOUZA, Roberto Martins de e TOMANIK, E. Quantification of folded metal in cylinder bores through surface relocation. Wear, v. 384-385, p. 142-150, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2017.05.016. Acesso em: 19 abr. 2024.
APA
Obara, R. B., Souza, R. M. de, & Tomanik, E. (2017). Quantification of folded metal in cylinder bores through surface relocation. Wear, 384-385, 142-150. doi:10.1016/j.wear.2017.05.016
NLM
Obara RB, Souza RM de, Tomanik E. Quantification of folded metal in cylinder bores through surface relocation [Internet]. Wear. 2017 ; 384-385 142-150.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2017.05.016
Vancouver
Obara RB, Souza RM de, Tomanik E. Quantification of folded metal in cylinder bores through surface relocation [Internet]. Wear. 2017 ; 384-385 142-150.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2017.05.016
Artigo de periodico
Material removal factor (fab): A critical assessment of its role in theoretical and practical approaches to abrasive wear of ductile materials (2017)
Franco, Luiz Alberto ; Sinatora, Amilton
Source: Wear. Unidade: EP
Subjects: DESGASTE ABRASIVO, AÇO FUNDIDO, FERRO FUNDIDO CINZENTO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FRANCO, Luiz Alberto e SINATORA, Amilton. Material removal factor (fab): A critical assessment of its role in theoretical and practical approaches to abrasive wear of ductile materials. Wear, v. 382-383, p. 51-61, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2017.04.006. Acesso em: 19 abr. 2024.
APA
Franco, L. A., & Sinatora, A. (2017). Material removal factor (fab): A critical assessment of its role in theoretical and practical approaches to abrasive wear of ductile materials. Wear, 382-383, 51-61. doi:10.1016/j.wear.2017.04.006
NLM
Franco LA, Sinatora A. Material removal factor (fab): A critical assessment of its role in theoretical and practical approaches to abrasive wear of ductile materials [Internet]. Wear. 2017 ; 382-383 51-61.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2017.04.006
Vancouver
Franco LA, Sinatora A. Material removal factor (fab): A critical assessment of its role in theoretical and practical approaches to abrasive wear of ductile materials [Internet]. Wear. 2017 ; 382-383 51-61.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2017.04.006
Artigo de periodico
Microabrasion of three experimental cobalt-chromium alloys: Wear rates and wear mechanisms (2017)
Marques, Flávio Parreiras; Bozzi, Antonio Cesar ; Scandian, Cherlio ; Tschiptschin, André Paulo
Source: Wear. Unidade: EP
Subjects: COBALTO, RESISTÊNCIA DOS MATERIAIS, DESGASTE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARQUES, Flávio Parreiras et al. Microabrasion of three experimental cobalt-chromium alloys: Wear rates and wear mechanisms. Wear, v. 390-391, p. 176-183, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2017.07.023. Acesso em: 19 abr. 2024.
APA
Marques, F. P., Bozzi, A. C., Scandian, C., & Tschiptschin, A. P. (2017). Microabrasion of three experimental cobalt-chromium alloys: Wear rates and wear mechanisms. Wear, 390-391, 176-183. doi:10.1016/j.wear.2017.07.023
NLM
Marques FP, Bozzi AC, Scandian C, Tschiptschin AP. Microabrasion of three experimental cobalt-chromium alloys: Wear rates and wear mechanisms [Internet]. Wear. 2017 ; 390-391 176-183.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2017.07.023
Vancouver
Marques FP, Bozzi AC, Scandian C, Tschiptschin AP. Microabrasion of three experimental cobalt-chromium alloys: Wear rates and wear mechanisms [Internet]. Wear. 2017 ; 390-391 176-183.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2017.07.023
Artigo de periodico
Effect of abrasive particle size on slurry abrasion resistance of austenitic and martensitic steels (2017)
Tressia, G; Penagos, Jose Jimmy; Sinatora, Amilton
Source: Wear. Unidade: EP
Subjects: DESGASTE ABRASIVO, RESISTÊNCIA DOS MATERIAIS, AÇO INOXIDÁVEL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TRESSIA, G e PENAGOS, Jose Jimmy e SINATORA, Amilton. Effect of abrasive particle size on slurry abrasion resistance of austenitic and martensitic steels. Wear, v. 376–377, p. 63-69, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2017.01.073. Acesso em: 19 abr. 2024.
APA
Tressia, G., Penagos, J. J., & Sinatora, A. (2017). Effect of abrasive particle size on slurry abrasion resistance of austenitic and martensitic steels. Wear, 376–377, 63-69. doi:10.1016/j.wear.2017.01.073
NLM
Tressia G, Penagos JJ, Sinatora A. Effect of abrasive particle size on slurry abrasion resistance of austenitic and martensitic steels [Internet]. Wear. 2017 ; 376–377 63-69.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2017.01.073
Vancouver
Tressia G, Penagos JJ, Sinatora A. Effect of abrasive particle size on slurry abrasion resistance of austenitic and martensitic steels [Internet]. Wear. 2017 ; 376–377 63-69.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2017.01.073
Artigo de periodico
Scratch test of active screen low temperature plasma nitrided AISI 410 martensitic stainless steel (2017)
Espitia Sanjuán, Luis Armando ; Dong, Hanshan; Li, Xiao-Ying; Pinedo, Carlos Eduardo ; Tschiptschin, André Paulo
Source: Wear. Unidade: EP
Subjects: ALTA TEMPERATURA, AÇO INOXIDÁVEL MARTENSÍTICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ESPITIA SANJUÁN, Luis Armando et al. Scratch test of active screen low temperature plasma nitrided AISI 410 martensitic stainless steel. Wear, v. 376–377, p. 30-36, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2017.01.091. Acesso em: 19 abr. 2024.
APA
Espitia Sanjuán, L. A., Dong, H., Li, X. -Y., Pinedo, C. E., & Tschiptschin, A. P. (2017). Scratch test of active screen low temperature plasma nitrided AISI 410 martensitic stainless steel. Wear, 376–377, 30-36. doi:10.1016/j.wear.2017.01.091
NLM
Espitia Sanjuán LA, Dong H, Li X-Y, Pinedo CE, Tschiptschin AP. Scratch test of active screen low temperature plasma nitrided AISI 410 martensitic stainless steel [Internet]. Wear. 2017 ; 376–377 30-36.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2017.01.091
Vancouver
Espitia Sanjuán LA, Dong H, Li X-Y, Pinedo CE, Tschiptschin AP. Scratch test of active screen low temperature plasma nitrided AISI 410 martensitic stainless steel [Internet]. Wear. 2017 ; 376–377 30-36.[citado 2024 abr. 19 ] Available from: https://doi.org/10.1016/j.wear.2017.01.091

USP Schools

ReP

Filtros

Departament

Authors

USP affiliated authors

Date published

Subjects

Funding Agencies

Indexado em

Normalized affiliation

Non normalized affiliation

Countries of institutions of collaboration